Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhotodiode 900 nm 50 mW TO-39

SFH 221

Version 1.5 | 2018-12-03

Produktdatenblatt | Version 1.1

www.osram-os.com

Applications

SFH 221

Metal Can

TO39

Silicon Dual Photodiode

— Electronic Equipment

— Industrial Automation (Machine Controls, Light

Barriers, Vision Controls)

— Measurement Levelling

Features:

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Especially suitable for applications from 400 nm to 1100 nm

— High photosensitivity

— Hermetically sealed metal package (similar to TO-5), suitable up to 125 °C

— Double diode with extremely high homogeneousness

Ordering Information

Type Photocurrent Photocurrent Ordering Code

typ.

= 1000 lx; Std. Light A; V

= 5 V E

= 1000 lx; Std. Light A; V

= 5 V

SFH 221 ≥ 15 µA 24 µA Q62702P0270

For operating conditions of T

> 85 °C please contact us.

Summary of content (13 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 221 SFH 221 Metal Can ® TO39 Silicon Dual Photodiode Applications ——Measurement Levelling ——Electronic Equipment ——Industrial Automation (Machine Controls, Light Barriers, Vision Controls) Features: ——ESD: 2 kV acc.
PAGE 2
SFH 221 Maximum Ratings TA = 25 °C Parameter Symbol Operating Temperature Top min. max. -40 °C 125 °C Storage temperature Tstg min. max. -40 °C 125 °C Reverse voltage VR max. 10 V Insulation voltage vs. package VIS max. 100 V Total power dissipation Ptot max. 50 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
SFH 221 Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 900 nm Spectral range of sensitivity λ10% typ. 400 ... 1100 nm Radiant sensitive area A typ. 1.54 mm² Dimensions of active chip area LxW typ. 0.7 x 2.2 mm x mm Half angle φ typ. 55 ° Dark current VR = 10 V IR typ. max. 10 nA 100 nA Insulation current VIS = 100 V IIS typ. max. 0.1 nA 1 nA Spectral sensitivity of the chip λ = 850 nm Sλ typ. 0.55 A / W Max.
PAGE 4
SFH 221 Relative Spectral Sensitivity 1), 2) Srel = f (λ) Directional Characteristics Srel = f (φ) 4 Version 1.
PAGE 5
SFH 221 Photocurrent/Open-Circuit Voltage IP (VR = 5 V) / VO = f (Ee) Capacitance 1), 2) Dark Current IR = f (VR); E = 0 1), 2) C = f (VR); f = 1 MHz; E = 0; 5 Version 1.
PAGE 6
SFH 221 Dark Current 1) IR = f (TA); E = 0; VR = 10 V Power Consumption Ptot = f (TA) 6 Version 1.
PAGE 7
SFH 221 Dimensional Drawing 3) Approximate Weight: 780.0 mg 7 Version 1.
PAGE 8
SFH 221 TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 8 Version 1.
PAGE 9
SFH 221 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 10
SFH 221 Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS webside. Packing Please use the recycling operators known to you.
PAGE 11
SFH 221 Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ.
PAGE 12
SFH 221 Revision History Version Date Change 1.5 2018-11-30 Characteristics 12 Version 1.