Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhotodiode 860 nm 150 mW T1

SFH 229

Version 1.3 | 2018-07-11

Produktdatenblatt | Version 1.1

www.osram-os.com

SFH 229

Radial T1

Silicon PIN Photodiode with very short switching time

Applications

— Electronic Equipment

— Highbay Industrial

— Industrial Automation (Machine Controls, Light

Barriers, Vision Controls)

— Smoke Detectors

— White Goods

Features:

— Package: clear epoxy

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Especially suitable for applications from 380 nm to 1100 nm

— Short switching time (typ. 10 ns)

— 3 mm LED plastic package

— Also available on tape and reel

Ordering Information

Type Photocurrent Photocurrent Ordering Code

typ.

= 1000 lx; Std. Light A; V

= 5 V E

= 1000 lx; Std. Light A; V

= 5 V

SFH 229 ≥ 18 µA 28 µA Q62702P0215

Summary of content (13 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 229 SFH 229 Radial T1 Silicon PIN Photodiode with very short switching time Applications ——Electronic Equipment ——Smoke Detectors ——Highbay Industrial ——White Goods ——Industrial Automation (Machine Controls, Light Barriers, Vision Controls) Features: ——Package: clear epoxy ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Especially suitable for applications from 380 nm to 1100 nm ——Short switching time (typ.
PAGE 2
SFH 229 Maximum Ratings TA = 25 °C Parameter Symbol Operating Temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Reverse voltage VR max. 20 V Total power dissipation Ptot max. 150 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
SFH 229 Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 860 nm Spectral range of sensitivity λ10% typ. 380 ... 1100 nm Radiant sensitive area A typ. 0.31 mm² Dimensions of active chip area LxW typ. 0.56 x 0.56 mm x mm Half angle φ typ. 17 ° Dark current VR = 10 V IR typ. max. Spectral sensitivity of the chip λ = 850 nm Sλ typ. 0.62 A / W Quantum yield of the chip λ = 850 nm η typ. 0.
PAGE 4
SFH 229 Relative Spectral Sensitivity 1), 2) Srel = f (λ) Directional Characteristics Srel = f (φ) 4 Version 1.
PAGE 5
SFH 229 Photocurrent/Open-Circuit Voltage IP (VR = 5 V) / VO = f (Ev) Capacitance 1), 2) Dark Current IR = f (VR) ; E = 0 1), 2) C = f (VR); f = 1 MHz; E = 0; 5 Version 1.
PAGE 6
SFH 229 Dark Current 2) IR = f (TA); E = 0; VR = 10 V IR OHF05549 102 nA 101 100 10-1 10-2 10-3 -25 0 25 50 75 ˚C 100 TA Power Consumption Ptot = f (TA); 6 Version 1.
PAGE 7
SFH 229 Dimensional Drawing 3) Collector (Transistor) Cathode (Diode) ø3.1 (0.122) ø2.9 (0.114) 0.7 (0.028) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) 2.54 (0.100) spacing Area not flat 5.2 (0.205) 4.5 (0.177) 4.1 (0.161) 3.9 (0.154) 4.0 (0.157) 3.6 (0.142) 3.5 (0.138) 1.8 (0.071) 1.2 (0.047) 29 (1.142) 27 (1.063) 0.6 (0.024) 0.4 (0.016) Chip position 6.3 (0.248) 5.9 (0.232) GEOY6653 Approximate Weight: 156.0 mg Package marking: Cathode 7 Version 1.
PAGE 8
SFH 229 Recommended Solder Pad Pad 1: anode 8 Version 1.
PAGE 9
SFH 229 TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.
PAGE 10
SFH 229 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 11
SFH 229 Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 12
SFH 229 Glossary 1) Testing temperature: TA = 25°C 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ.