Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhotodiode 850 nm 120 mW DIL

SFH 2400

Version 1.8 | 2018-06-21

Produktdatenblatt | Version 1.1

www.osram-os.com

SFH 2400

Smart DIL

Silicon PIN Photodiode

Applications

— Electronic Equipment

— LIDAR, Pre-Crash, ACC

— Rain sensors

Features:

— Package: clear epoxy

— Quali󰘰cations: The product quali󰘰cation test plan is based on the guidelines of AEC-Q101-REV-C,

Stress Test Quali󰘰cation for Automotive Grade Discrete Semiconductors.

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Especially suitable for applications from 380 nm to 1100 nm

— Short switching time (typ. 5 ns)

Ordering Information

Type Photocurrent Photocurrent Ordering Code

typ.

= 1000 lx; Std. Light A; V

= 5 V E

= 1000 lx; Std. Light A; V

= 5 V

SFH 2400-Z ≥ 6 µA 10 µA Q65110A2628

Summary of content (16 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 2400 SFH 2400 Smart DIL Silicon PIN Photodiode Applications ——Electronic Equipment ——Rain sensors ——LIDAR, Pre-Crash, ACC Features: ——Package: clear epoxy ——Qualifications: The product qualification test plan is based on the guidelines of AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors. ——ESD: 2 kV acc.
PAGE 2
SFH 2400 Maximum Ratings TA = 25 °C Parameter Symbol Operating Temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Reverse voltage VR max. 20 V Reverse voltage t ≤ 2 min VR max. 50 V Total power dissipation Ptot max. 120 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
SFH 2400 Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 850 nm Spectral range of sensitivity λ10% typ. 380 ... 1100 nm Radiant sensitive area A typ. 1.00 mm² Dimensions of active chip area LxW typ. 1x1 mm x mm Half angle φ typ. 60 ° Dark current VR = 20 V IR typ. max. 1 nA 5 nA Spectral sensitivity of the chip λ = 870 nm Sλ typ. 0.65 A / W Quantum yield of the chip η typ. 0.
PAGE 4
SFH 2400 Relative Spectral Sensitivity 1), 2) Srel = f (λ) OHF01129 100 S rel % 80 60 40 20 0 400 Directional Characteristics 600 800 1000 nm 1200 λ 1), 2) Srel = f (φ) 40 50 30 20 10 60 ϕ 0 1.0 0.8 0.6 70 0.4 80 0.2 0 90 1.0 0.8 100 OHF01402 4 Version 1.8 | 2018-06-21 0.6 0.
PAGE 5
SFH 2400 Photocurrent/Open-Circuit Voltage IP (VR = 5 V) / VO = f (Ev) ΙP 1), 2) Dark Current 1), 2) IR = f (VR) ; E = 0 OHF01025 10 2 µA 10 3 mV VO 10 1 VO ΙR OHF01026 10 4 pA 10 2 10 3 10 1 10 2 ΙP 10 0 10 -1 10 0 10 1 10 2 10 3 10 0 lx 10 4 EV Capacitance 2) C = f (VR); f = 1 MHz; E = 0; 5 Version 1.
PAGE 6
SFH 2400 Dark Current 2) IR = f (TA); E = 0; VR = 10 V OHF05718 100 µA IR 10-1 10-2 10-3 10-4 10-5 10-6 -50 0 50 ˚C 100 TA 6 Version 1.
PAGE 7
SFH 2400 Dimensional Drawing 3) Approximate Weight: 12.0 mg Package marking: Cathode Pin 1 Description cathode n.c. 3 anode 2 7 Version 1.
PAGE 8
SFH 2400 Recommended Solder Pad 3) Reflow Soldering Profile Product complies to MSL Level 4 acc. to JEDEC J-STD-020E OHA04525 300 ˚C T 250 Tp 245 ˚C 240 ˚C tP 217 ˚C 200 150 tL tS 100 50 25 ˚C 0 0 50 100 150 200 250 s 300 t 8 Version 1.
PAGE 9
SFH 2400 Profile Feature Symbol Pb-Free (SnAgCu) Assembly Minimum Recommendation Maximum Ramp-up rate to preheat*) 25 °C to 150 °C tS Time tS TSmin to TSmax 60 Ramp-up rate to peak*) TSmax to TP 2 3 100 120 2 3 Unit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 °C Time within 5 °C of the specified peak temperature TP - 5 K tP 20 30 3 6 Ramp-down rate* TP to 100 °C 10 480 Time 25 °C to TP All temperatures r
PAGE 10
SFH 2400 Tape and Reel 4) W1 D0 P0 A N F W E 13.0 ±0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Reel dimensions [mm] A W Nmin W1 W2 max Pieces per PU 180 mm 12 + 0.3 / - 0.1 60 12.4 + 2 18.4 2000 10 Version 1.
PAGE 11
SFH 2400 Barcode-Product-Label (BPL) Dry Packing Process and Materials 3) Moisture-sensitive label or print Barcode label L VE LE see lab e If nk, bla cod bar hu ve y el . H) (R dit mi e ed ag % . RH /60 ˚C rar ck rel 30 N s VE RS inf pa % ainITI TO of to ak 90 d ntNSUC < ns (pe or TIO d , cte itio an bje ing U g coSEND ˚C nd 5 ˚C su ss CO Ais baRE co ± ce y 40 be TU MI CThIS ˚C < ll pro tor SE ati _ < ). urs urs Ho de urs Ho co 72 Ho urs te 48 e Ho 24 6 da e tim e th tim or ).
PAGE 12
SFH 2400 Transportation Packing and Materials 3) DE R 18 -1 -1 +Q P OU P: 44 01 C: 99 8 D/ 20 00 (9 D) 210 021 : 34 O H 12 (Q )Q TY : S S em R ic AM o nd O uc p to to H rs NO TC BA 3G 5 14 2 (6 P) NO : 12 T 11 00 LO (1 T) NO : OD M Y DE -1 18 P -1 + Q R G RO UP : (G ) 44 01 D/ C: (9 D) 0 AM 00 TY :2 )Q O SR 34 NO : (X ) PR O D 5 14 2 110 0 (Q A R ic NO : O S em S (1 T) LO T NO (6 P) : 12 3G BA TC H H 12 o M n O d u p ct to o rs M Muster
PAGE 13
SFH 2400 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 14
SFH 2400 Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 15
SFH 2400 Glossary 1) Testing temperature: TA = 25°C 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ.