www.osram-os.com Produktdatenblatt | Version 1.1 SFH 320 FA SFH 320 FA TOPLED ® Silicon NPN Phototransistor in SMT TOPLED®-Package Applications ——Electronic Equipment ——White Goods Features: ——Package: black epoxy ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Spectral range of sensitivity: (typ) 750 ... 1120 nm ——High linearity ——P-LCC-2 package ——Available in groups ——Suitable for all soldering methods Ordering Information Type Photocurrent VCE = 5 V; λ = 950 nm; Ee = 0.
SFH 320 FA Maximum Ratings TA = 25 °C Parameter Symbol Operating temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Collector-emitter voltage VCE max. 35 V Collector current IC max. 15 mA Collector surge current τ ≤ 10 µs ICS max. 75 mA Total power dissipation Ptot max. 165 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
SFH 320 FA Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 980 nm Spectral range of sensitivity λ10% typ. 750 ... 1120 nm Chip dimensions LxW typ. 0.45 x 0.45 mm x mm Radiant sensitive area Ø = 220 µm A typ. 0.038 mm² Half angle φ typ. 60 ° Dark current VCE = 20 V; E = 0 ICE0 typ. max. Rise time IC = 1 mA; VCC = 5 V; RL = 1 kΩ tr typ. 7 µs Fall time IC = 1 mA; VCC = 5 V; RL = 1 kΩ tf typ.
SFH 320 FA Relative Spectral Sensitivity 2), 3) Srel = f (λ) Directional Characteristics Srel = f (φ) 4 Version 1.
SFH 320 FA Photocurrent Photocurrent 2), 3) IPCE = f (Ee) ; VCE = 5 V Dark Current 2), 3) IPCE = f (VCE), Ee = Parameter 2), 3) ICE0 = f (VCE) ; E = 0 ; 5 Version 1.
SFH 320 FA Collector-Emitter Capacitance 2), 3) CCE = f (VCE); f = 1 MHz; E = 0 ; Dark Current Photocurrent 2) ICE0 = f (TA); E = 0 2) IPCE,rel = f (TA); VCE = 5 V 6 Version 1.
SFH 320 FA Power Consumption Ptot = f (TA); RthJA = 450 K / W 7 Version 1.
SFH 320 FA Dimensional Drawing 4) Approximate Weight: 35.0 mg Package marking: Collector 8 Version 1.
SFH 320 FA Recommended Solder Pad 4) Reflow Soldering Profile Product complies to MSL Level 2 acc. to JEDEC J-STD-020E 9 Version 1.
SFH 320 FA Profile Feature Symbol Pb-Free (SnAgCu) Assembly Minimum Recommendation Maximum Ramp-up rate to preheat*) 25 °C to 150 °C tS Time tS TSmin to TSmax 60 Ramp-up rate to peak*) TSmax to TP 2 3 100 120 2 3 Unit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 °C Time within 5 °C of the specified peak temperature TP - 5 K tP 20 30 3 6 Ramp-down rate* TP to 100 °C 10 480 Time 25 °C to TP All temperatures
SFH 320 FA Tape and Reel 5) Reel dimensions [mm] A W Nmin W1 W2 max Pieces per PU 180 mm 8 + 0.3 / - 0.1 60 8.4 + 2 14.4 2000 330 mm 8 + 0.3 / - 0.1 60 8.4 + 2 14.4 8000 11 Version 1.
SFH 320 FA Barcode-Product-Label (BPL) Dry Packing Process and Materials 4) Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card according JEDEC-STD-033. 12 Version 1.
SFH 320 FA Transportation Packing and Materials 4) Dimensions of transportation box in mm Width Length Height 200 ± 5 mm 195 ± 5 mm 30 ± 5 mm 352 ± 5 mm 352 ± 5 mm 33 ± 5 mm 13 Version 1.
SFH 320 FA Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
SFH 320 FA Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
SFH 320 FA Glossary 1) IPCEmin: IPCEmin is the min. photocurrent of the specified group. 2) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line.
SFH 320 FA Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved. 17 Version 1.