Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsBiometric SensorsBiometric Sensor Surface Mount 526 nm 25 mA

2016-10-21 1

! 2007-05-23

BIOFY

Sensor

Version 1.1

SFH 7070

Ordering Information

Features:

• Multi chip package featuring two green emitters and one detector

• Package size: (WxDxH) 7.5 mm x 3.9 mm x 0.9 mm

• Light Barriers to block optical crosstalk

• optimized for strong PPG signal

Applications

• Heart rate monitoring

for:

• Wearable devices (e.g. smart watches, fitness trackers, ...)

• Mobile devices

Type

Ordering Code

SFH 7070 Q65111A9887

Summary of content (16 pages)

PAGE 1
! 2007-05-23 BIOFY® Sensor Version 1.1 SFH 7070 Features: • Multi chip package featuring two green emitters and one detector • Package size: (WxDxH) 7.5 mm x 3.9 mm x 0.9 mm • Light Barriers to block optical crosstalk • optimized for strong PPG signal Applications • Heart rate monitoring for: • Wearable devices (e.g. smart watches, fitness trackers, ...
PAGE 2
Version 1.
PAGE 3
Version 1.1 SFH 7070 Maximum Ratings (TA = 25 °C) Parameter Symbol Values Unit General Operating temperature range Top -40 … 85 °C Storage temperature range Tstg -40 … 85 °C ESD withstand voltage (acc.
PAGE 4
Version 1.1 SFH 7070 Characteristics (TA = 25 °C) Parameter Symbol Value Unit Green Emitter (single emitter) Wavelength of peak emission (IF = 20 mA) (typ.) peak Centroid Wavelength (IF = 20 mA) (typ. (max.)) centroid Spectral bandwidth at 50% of Imax (IF = 20 mA) (typ.) Half angle 526 nm 530 (±10) nm  32 nm (typ.)  ± 60 Rise and fall time of Ie (10% and 90% of Ie max) (IF = 100 mA, tp = 16 µs, RL = 50 ) (typ.) tr, tf 56 ns Forward voltage (IF = 20 mA) (typ. (max.
PAGE 5
Version 1.1 SFH 7070 Characteristics (TA = 25 °C) Parameter Symbol Value Unit Detector (typ.) Photocurrent (Ee = 0.1 mW/cm2, = 530 nm, VR = 5 V) IP,530 0.985 µA Wavelength of max. sensitivity (typ.) S max 635 nm Spectral range of sensitivity (typ.) 10% 402 … 694 nm Radiation sensitive area (typ.) A Dimensions of radiant sensitive area (typ.) LxW Half angle (typ.)  ± 57 Dark current (VR = 5 V, Ee = 0 mW/cm2) (typ. (max.)) IR 0.
PAGE 6
Version 1.
PAGE 7
Version 1.1 SFH 7070 Diagrams for green emitters Max.
PAGE 8
Version 1.
PAGE 9
Version 1.
PAGE 10
Version 1.
PAGE 11
Version 1.1 SFH 7070 Recommended solder pad design Dimensions in mm (inch). Reflow Soldering Profile Product complies to MSL Level 4 acc. to JEDEC J-STD-020D.
PAGE 12
Version 1.
PAGE 13
Version 1.1 SFH 7070 Tape and Reel 16 mm tape with 1500 pcs. on ∅ 180 mm reel W1 D0 P0 A N F W E 13.0 ±0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Dimensions in mm Tape Dimensions [mm] W 16 +0.3 / -0.1 P0 P1 P2 D0 E F 4 ±0.1 8 ±0.1 2 ±0.05 1.5 ±0.1 1.75 ±0.1 7.5 ±0.05 Reel Dimensions [mm] A W 180 2016-10-21 16 Nmin W1 W2max 60 16.4 +2 22.
PAGE 14
Version 1.1 SFH 7070 EX AM PL E Barcode-Product-Label (BPL) OSRAM Opto po BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors tors ors r RoHS Compliant (6P) BATCH NO: NO:: 1234567 1234567890 234 7890 890 ML Temp ST X XXX °C X (1T) LOT NO: 1234567890 (9D) (9D D) D/C: D) D/C D/ : 123 1234 234 34 RXX Pack: R RX XX DEMY XXX XXX X_X123_1234.1234 X_X123_1 12 _123 123 12 234.
PAGE 15
Version 1.
PAGE 16
Version 1.1 SFH 7070 Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.