Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsFork coupler 5mm 30V SMD 950nm

2015-12-23 1

2015-1 2-23

Slotted Interrupter

Version 1.3

SFH 9540

Ordering Information

Features:

• Suitable for surface mounting (SMT)

• Compact housing out of black LCP

• GaAs infrared emitter (950 nm)

• Silicon phototransistor with daylight-cutoff filter

• With positioning pin

• Suitable for pick and place

• High sensing accuracy (slit width: 0.5 mm)

• Wide gap between emitter and detector (5 mm)

• High stability on pcb due to large width of device (6.8 mm)

Applications

• Speed control

• Motor control

• Monitoring of paper feed in printers, copiers, facsimiles

• Control of print head in printers

• Coin detection

• Optoelectronic switches

Type: Collector-emitter current Ordering Code

PCE

[µA]

= 20 mA, V

= 5 V

SFH 9540 ≥ 1000 Q65111A6122

Summary of content (11 pages)

PAGE 1
2015-12-23 Slotted Interrupter Version 1.3 SFH 9540 Features: • Suitable for surface mounting (SMT) • Compact housing out of black LCP • GaAs infrared emitter (950 nm) • Silicon phototransistor with daylight-cutoff filter • With positioning pin • Suitable for pick and place • High sensing accuracy (slit width: 0.5 mm) • Wide gap between emitter and detector (5 mm) • High stability on pcb due to large width of device (6.
PAGE 2
Version 1.
PAGE 3
Version 1.3 SFH 9540 Parameter Symbol Values Unit (typ) 840 ... 1080 nm Spectral range of sensitivity (typ) λ10% Capacitance (VCE = 0 V, f = 1 MHz, E = 0) (typ) CCE Dark current (VCE = 20 V) (typ (max)) ICE0 6.5 pF 2 (≤ 50) nA IPCE 1000 µA VCEsat ≤ 400 mV Interrupter Collector-emitter current (IF = 20 mA, VCE = 5 V) (min) Collector-emitter saturation voltage (IF = 20 mA, IC = 0.
PAGE 4
Version 1.
PAGE 5
Version 1.3 SFH 9540 Package Outline Dimensions in mm.
PAGE 6
Version 1.3 SFH 9540 Pinning Pin Description 1 Emitter - Anode 2 Emitter - Cathode 3 Sensor - Collector 4 Sensor - Emitter Package Slotted Interrupter Approximate Weight: 0.
PAGE 7
Version 1.3 SFH 9540 4.1 (0.161) 1.6 (0.063) 0.9 (0.035) 6.1 (0.240) 1.95 (0.077) 2.54 (0.100) Recommended Solder Pad 8.8 (0.346) Padgeometrie für verbesserte Wärmeableitung E Paddesign for improved heat dissipation (7.4 (0.291)) Cu-Fläche > 16 mm 2 Cu-area > 16 mm 2 Bauteil positioniert Component Location on Pad E Lötstopplack Solder resist S OHFY1950 Dimensions in mm (inch).
PAGE 8
Version 1.3 SFH 9540 Reflow Soldering Profile Product complies to MSL Level 1 acc. to JEDEC J-STD-020D.
PAGE 9
Version 1.3 SFH 9540 Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 10
Version 1.3 SFH 9540 Glossary 1) Thermal resistance: Mounting on PC-board with > 5 mm2 pad size 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.