User Guide

MULTIWATT
New electronic ballasts that offer the versatility to operate multiple
lamp types of various wattages. These multi-watt and multi-lamp
models also can vary the number of lamps operated (i.e. 1 or 2
lamps), reducing the amount of ballast types required.
Dual Entry CFL
Dual entry, color coded connectors located on
the side and bottom allow for increased mounting
flexibility with one ballast and also increased ease of installation.
T5HO HELIOS
™
Dimming
Electronic ballast with continuous 100-1% dimming range.
They can be controlled by a wide variety of 0-10 volt DC control
devices, including daylight sensors, building automation systems
and compatible wall box dimming controllers.
DALI Digital Dimming
DALI digital control technology offers full-range continuous
dimming, individual fixture control and feedback. The communica-
tions protocol is “DALI”, an acronym for “Digital Addressable
Lighting Interface”. DALI is the worldwide standard for digital
lighting control.
The industry’s first product to
operate from either Power-line
Fluorescent controllers or low-
voltage (0-10 Vdc) controls.
• Efficient - Highest Energy
Efficiency dimming system
• Versatile - Controls flexi-
bility & universal-voltage
• Intelligent - Senses faulty
wiring and lamp failure
PENTRON
®
HO
New T5 high output fluorescent lamp systems provide almost
twice the lumen output of standard lamps and allow new low
profile fixtures to be designed.
QUICKSENSE
®
The patented end-of-lamp-life sensing technology that helps
prevent lamp overheating and established the benchmark for
industry recommendations for T5 and smaller diameter lamps.
PLUS (High Ballast Factor) Systems
T8 lamps are run at higher lumen levels to allow fewer lamps or
higher light levels.
ICETRON
®
Systems
Unique “Inductively Coupled Electrodeless Fluorescent Lamp
Systems” that provide 100,000 hour rated lamp life for use in
high maintenance cost areas.
Electronic Metal Halide Systems
QUICKTRONIC
®
MH features a state of the art electronic design
to deliver performance levels unattainable with standard
magnetic based lighting systems. Provides energy savings up to
50% compared to magnetic ballasts. New high wattage systems
coming soon!
LED Power Supplies & DIMMING Modules
OSRAM OPTOTRONIC
®
power supplies are available in wide
range of input voltages for worldwide use on single-phase AC
power lines. These supplies are available with constant voltage or
constant current outputs.
The OPTOTRONIC OTDIM are dimming modules that can be
used with LED power supply modules.
The QUICK 60+
®
System Warranty
It’s the simple way to make sure
you’re completely covered.
It starts with the ballast. When you
purchase any QUICKTRONIC
ballast, it’s warranted for a period
of up to 60 months. Then, when
you add SYLVANIA lamps, you
benefit from additional coverage
for those lamps; that’s the PLUS. (For lamp replacements, OSRAM
SYLVANIA will send lamps to your facility – no labor for lamps.)
With our lamps and ballasts, your installation will enjoy the highest
levels of performance. If there is an issue, there’s only one phone
call to make; you won’t get caught in the middle!
It’s that simple.
For detailed warranty information, call 1-800-LIGHTBULB,
(1-800-544-4828) and request warranty service or visit
www.sylvania.com.
T8 & T5 POWERSENSE
®
DIMMING
For Complete power supply and LED module details,
refer to the OSRAM SYLVANIA LED Systems
Specification Guide or www.sylvania.com.
OSRAM SYLVANIA National Customer Service and Sales Center 1-800-LIGHTBULB (1-800-544-4828) or www.sylvania.com
175
E
L
E
C
T
R
O
N
I
C
B
A
L
L
A
S
T
S
PLG_graycale_2008_FINAL.qxd:Empty 12/18/07 10:43 AM Page 175