User Guide

SYMBOLS & FOOTNOTES FOR DISPLAY/OPTIC LAMPS
Symbol Description
New item introduced within the past year.
Item will be discontinued when inventory is depleted.
Footnote Description
1 Type of current: square-wave AC.
2 Lamp arc needs to be in horizontal operating position.
3 Any operating position allowed with appropriate cooling.
4 In certain countries there are third party property rights relating to equipment which must be observed if these lamps are used in dentistry.
5 Lamp suited for video camera heads; 500hr life @ 1.8V/ 45 min. ON / 15 min. OFF.
6 WARNING: This lamp is designed for heating purposes. It emits a strong Infrared radiation with a temperature at focal point approx. 1300
degrees C. Read Safety and Warning instructions before using this lamp.
7 Lamp also available in BELLAPHOTÖ (Product Number 54163).
8 Lamp also available in BELLAPHOTÖ (Product Number 54840).
9 Lamp service life 75hr life is defined at 76V with a duty cycle of 45 min. ON / 15 min. OFF.
10 Current bar needs to be positioned underneath the discharge arc during operation.
11 Lamp also available in 240 V model.
12 Preferred operating position is horizontal; vertical possible for short periods.
13 Lamp has internal proximity reflector.
14 Base - filament connections: Pins 1 and 4.
15 Lamp has monoplane filament 10 X 10 mm.
16 Lamp has monoplane filament.
17 Lamp also available as a 240V model (Product Number 54977).
18 Lamp has a biplane filament.
19 WARNING: Lamp has a special GY22 base. Ignition voltage must be applied only to the thin pin.
20 Lamp interchangeable with HX 602
21 Lamp interchangeable with HX 600
22 Lamp also available as 115V model (Product Number 54636).
23 Lamp has two separately switchable filaments.
24 Length l = Contact to contact.
25 Lamp also available in 240 V version : Product Number 54619.
26 High-performance HPL halogen lamps are manufactured under license from ETC,Inc.
27 Do not tilt perpendicular to the filament.
28 WARNING: The contact pins on the base are connected internally. The electrode farthest from the base must be connected via cable.
29 MFL=Medium Flood
30 NSP=Narrow Spot
31 WFL=Wide Flood
32 VNSP=Very Narrow Spot.
33 With biplane filament , higher luminous intensity can be achieved.
34 Lamp has a flat core filament with filament area perpendicular to the lamp axis.
35 Hg 100 also suitable for DC operation (no igniter needed when connected to 230V)
36 Lamp also available with connecting cable and plug-in contact.XBO R 180W/45 C OFR (Product Number 69183).
37 Lampholder for FaX 1.5 base = HMI Socket 46721 (Product Number 69302).
38 Lamp also available in ozone-free version XBO 75 W/2 OFR (Product Number 69232)
39 Lamp also available in ozone-free version XBO 150 W/1 OFR (Product Number 69235)
40 Lamp uses Suprasil quartz glass.
41 Lamp also available in ozone-free version XBO 450 W OFR (Product Number 69245)
42 Lamp also available in Suprasil quartz glass version XBO 450 W/4 (Product Number 69244)
43 S=Short
44 C=Base with Cable
D
I
S
P
L
A
Y
O
P
T
I
C
R
E
F
E
R
E
N
C
E
For more complete product information visit www.sylvania.com
275
071_DO_drop.qxd 12/13/07 3:25 PM Page 275