User Guide

SYMBOLS & FOOTNOTES FOR DISPLAY/OPTIC LAMPS
Footnote Description
45 H=Suitable for horizontal operation
46 TC=Thread and Cable
47 CA=Cable on anode base
48 All HTI« lamps are hot restrikeable with the exception of HTI 150, HTI 152, HTI 405 W/SE, and 705 W/SE.
49 SHSC=Extra short version for horizontal burning position, anode connection via cable (super short)
50 TM=Threaded Modified
51 TP=Threaded Pin
52 GS=Gap Shortened
53 SE=Single Ended
54 DE=Double Ended
55 DX= Double Ended eXtreme Seal technology
56 OFR=Ozone Free
57 Molybdenum pins have 1mm diameter.
58 s (Operating Position) = Vertical, base down
59 h (Operating Position) = Vertical, base up
60 p (Operating Position) = Horizontal
61 Lamp also available with 850 hr HBO 1500 W/PI (Product Number 69319)
62 Lamp also available as version HBO 2001 W/CI with 850hr life (Product number 69219)
63 Lamp is also available with connecting cable and plug-in contact. HTI 250W/32 C (Product Number 54089).
64 Lamp also available as version HBO 1003 W/PI with 850hr life (Product Number 69195)
65 Lamp also available as version HBO 2500 W/PI with 850hr life (Product Number 69178)
66 Technical data if operated on AC: Current = 7.1 A, Volts = 67 V.
67 Average service life of lamp if operated with 400W is 100 hrs.
68 Magnetic arc stabilization required.
69 Lamp same as HBO 200 W/4 (Product Number 69224 but with increased radiation in the wavelength range below 450nm for UV-curing.
70 Technical lamp data if operated on AC: Current=4.2 A, Volts=65 V, Lumens=10,000 lm, Luminous Efficacy=50 lm/W.
71 Electrical data if lamp is operated on AC: Current=7.8 A, Volts=67 V.
72 Lamp has been specially adjustment for uniform illumination in the far field(200-250) mm focal length.
73 Cathode Base with 8-32 UNC-3A thread.
74 Anode Base=Sleeve base with M 6 thread.
75 Anode Base=Hexagon base with M 6 thread.
76 Anode Base with 8-32 UNC-3A thread.
77 Anode Base=Sleeve base with cooling fins and cable connection (M 6).
78 Anode Base with M 6 thread.
79 Anode Base with cable connection (M 8).
80 Anode Base with cable connection (M 6).
81 Anode Base with 8-32 UNC-3 thread.
82 Pin dimensions at front ceramic ring 2mm diameter, 10 mm length. Pin dimensions at rear ceramic base cap 2.5mm diameter, 11mm length.
83 Anode base with M 5x 0.9 thread
84 Cathode Hexagon base with M 5x 0.9 thread
85 Anode base with cable: length 340mm; connector 8/25.
86 For DC operation both Product Numbers 69198 & 69222 can be used (47...65Volts / 3.1...4.2Amps). For AC operation Product Number
69198 (L1 version 57 65 Volt / 3.6 Amps) or Product Number 69222 (L2 version 49 57 Volt / 4.2 Amps) can be used.
87 Product Number 69223 can be used for DC operation (47...65 Volts / 3.1...4.2Amps) and for AC operation (L2 version 49 57 Volt / 4.2
Amps).
88 For DC operation Product Number 69204 can be used (67-85 Volts / 5.9 - 7.4 Amps). For AC operation Product Number 69204 can be used
(L2 version 69-77 Volt / 7.8 Amps).
89 Anode and Cathode Base with UNC-3B thread.
90 Type of current: sine-wave (sinusoidal) AC.
D
I
S
P
L
A
Y
O
P
T
I
C
R
E
F
E
R
E
N
C
E
For more complete product information visit www.sylvania.com
276
071_DO_drop.qxd 12/13/07 3:25 PM Page 276