User Guide

SYMBOLS & FOOTNOTES FOR DISPLAY/OPTIC LAMPS
Footnote Description
272 Despite transverse filament, lamp can be inclined at any angle in s 90 position.
273 Lamp has snap-on male contact to DIN 46248.
274 Lamp also available with male contact according to DIN 46248. 64361/HLX Z (Product Number 58717)
275 Lamp has D.C. Bay Ring.
276 WARNING: Lamp only for use where seal temperature does not exceed 650 degrees F (343 degrees C). Minimum bulb wall temperature 480
degrees F (249 degrees C).
277 Lamp has 1.75 inch (44.45mm) stranded Nickel leads.
278 Max. Beam Candlepower (MBCP) : 175 kcd.
279 D=Digital
280 XL=Xtreme Life
281 CL=Classic Line
282 HP=High Performance
283 S=Sony (Sony projector)
284 Anode base with thread (M16)
285 High temperature base. Retards seal deterioration where seal temperature exceeds 650˚F.
286 For use where seal temperature does not exceed 650˚F.
287 Life at rated voltage and at 650˚F maximum seal temperature.
288 Usually limited to intermittent burning.
289 A suitable protective shield, screening technique, or both must be used to protect people and surroundings from the possibility of a lamp
shattering and from possible ultraviolet radiation.
290 Bulk pack= 30/case
291 Anode: Hexagon base with thread 8-32 UNC
D
I
S
P
L
A
Y
O
P
T
I
C
R
E
F
E
R
E
N
C
E
For more complete product information visit www.sylvania.com
281
071_DO_drop.qxd 12/13/07 3:25 PM Page 281