User Guide

For more complete product information visit www.sylvania.com
36
I
N
C
A
N
D
E
S
C
E
N
T
SYMBOLS & FOOTNOTES FOR INCANDESCENT LAMPS
Footnote Description
28 @ 120 volts, approximate 264 watts, 3850 lumens, 6250 hours
29 @ 120 volts, approximate 264 watts, 4390 lumens, 1875 hours
30 @ 120 volts, approximate 264 watts, 4305 lumens, 1875 hours
31 Additional product information can be found in the SYLVANIA Automotive, Miniature and Sealed Beam Lamp Catalog Form 208.
32 UV Filter capsule with axial filament in dichroic reflector.
33 UV Filter capsule with axial filament in aluminized reflector.
34 UV Filter capsule with axial filament in covered aluminized reflector .
35 2 3/4" circular window.
36 UV Filter capsule with axial filament in constant color, hard coated dichroic reflector.
37 UV Filter capsule with axial filament in constant color, hard coated Dichroic reflector and infrared reflective coating on the lamp capsule.
38 UV Filter capsule with axial filament in precisely engineered aluminum m reflector.
39 Suitable for indoor and outdoor use;
40 For indoor use only; suitable for outdoor use only if not directly exposed to weather
41 For indoor use only;
42 UV control capsule with transverse constant color filament in hard dichroic
43 State of the Art SPL Optics
44 Inner capsule with Infrared conserving coating and hard glass lens
45 UV Filter capsule with axial filament in covered dichroic reflector.
46 Operate only in porcelain sockets.
47 Infrared lamp technology
48 Caution: Operates under pressure and may shutter. Use appropriate techniques to protect people and surroundings. Do not operate in close
proximity to persons, combustible materials, or substances affected by heat or drying. Do not operate over 110% rated voltage because such
operation increases pressure and lamps' tendency to shatter. Ultraviolet output may cause skin and eye irritation with prolonged exposure.
Protect bulb from abrasions and scratches. Do not insert lamps when power is on. Follow operation
49 ECE Approved
50 Lamp Life B3 @ 13.2 volts.
51 Universal lamp housings for T2 slide based pilot lamps.
52 Socket dimensions front to panel to end of terminals.
53 UL File No. E31557(M) CSA File No.LR20904
54 Universal lamp housings for T2.5 and T3.25 miniature bayonet based lamps.
55 UL File No. E31557(M) CSA File No.LR20904
56 MIL-Std. 18236 B-MIL Std. 202B
57 Should be shielded against moisture falling on bulb.
58 Material : Black Phenolic
59 There are two distinctively different lamps with this part number. When ordering T-1 3/4 , #7327, please also specify category and base type.
S-11. #7327 discontinued.
60 MOL = Excluding pins.
61 Material : Plastic
62 Max. seal temperature 350 C (662F)
63 Max. bulb temperature 1000 C (1832F)
64 Min. bulb temperature 250 C (482F)
65 UV Filter capsule with axial filament in covered constant color, hard coated dichroic reflector.
66 UV Filter capsule with axial filament in covered constant color, hard coated dichroic reflector and infrared reflective coating on the lamp cap-
sule.
67 UV Filter capsule with transverse filament in constant color, hard co ated dichroic reflector .
68 Not recommended for use in enclosed close-fitting housings.
69 For Indoor Use only.
70 Because this bulb radiates considerable heat, do not use in enclosed, close fitting fixtures, or in close proximity to people, combustible mate-
rials, or substances adversely affected by heat or drying.
010_INCsf.qxd 11/29/07 8:08 AM Page 36