Datasheet

Rigid LINEARlight LED modules | Flexibility with modular principle
Rigid LINEARlight LED modules can be combined to create
highly effi cient complete systems by using our accesso-
ries. The modular design means that single components
can be rapidly and simply combined to create continuous
lines. This results in ready-to-use overall modules and
convenient, time-saving installations.
With rigid LINEARlight LED modules, you can illuminate linear structures such as shelving or coves with seamless,
interconnectable continuous light. Illumination is homogeneous, without shadows and even with directional light
through the use of optics. Thanks to their long lifespan, LINEARlight LED modules require only little maintenance
effort – a signifi cant advantage especially when installed in applications that are diffi cult to access. Applications
with long operating hours benefi t the most from the long lifespan – e.g. in retail stores, offi ce buildings and hotels.
The pre-installed overall modules provide effi cient plug-&-play solutions for simple, rapid on-site mounting.
The LEDs are already equipped with suitable optics, connectors and an elegant aluminum casing that serves
as a heat sink.
LINEARlight overall LED module 24 V
Common characteristics
— Attractive design with total height of only 13 mm
— Seamless light without shadowing
— Fine White Binning (3SDCM)
— Dimmable (PWM)
— Lifespan of up to 50 000 h (L70B50)
— Integral cooling via elegant aluminum profi le
— Various brand optics available
— IP20-protected electronics
— VDE-certifi ed
— On-board SMD connector for simple installation of
continuous light
LINEARlight POWER
— Luminous fl ux: up to 570 lm/280 mm (up to 2 250 lm/m)
— 21 LEDs
— Alternative to T5 fl uorescent lamps
— Main application: General illumination, coves
Rigid LINEARlight LED modules:
Matching systems for your application
16