Datasheet
IVIOS
®
LED III
LUM – Technical Information IVIOS
®
LED III Status as of 12/06/2015
Subject to modification Page 4 / 5
4) Control
Product name IVIOS
®
LED III 2x5,5W IVIOS
®
LED III 10W
Ballast / Control gear
External control gear
included (cabled on the
secondary side)
External control gear
included (cabled on the
secondary side)
Communication interface
--- ---
Permissible sinusoidal
operating voltage [V
AC
]
220 - 240 220 - 240
Secondary voltage [V
OUT
]
18 – 23V 18 – 23V
Color control
--- ---
Through-wiring
--- ---
Energy Efficiency Index EEI
--- ---
Dimmable
Yes Yes
Dimmable interface
--- ---
5) Dimmer Compatibility
IVIOS LED III 2x5,5W
Brand
Model
Load Range [W]
Type
Di
mming Range
[%]
Düwi 01600 50-300
Leading edge
30 - 100
Berker 2819 60-400
Gira 030000 60-400
Jung 0244020300 60-400
GAO 3511 50-300
Gira Gira 030700/I02 25-525 Trailing edge
IVIOS LED III 10W
Brand
Model
Load Range [W]
Type
Dimming Range
[%]
Gira 030000 60-400
Leading edge
30 - 100 Berker 2819 60-400
Gira Gira 030700/I02 25-525 Trailing edge
Application Notes:
• For best dimming results trailing edge dimmer type is recommended.
Please Note:
• The recommended list is based upon testing conducted by the manufacturer in a lab simulated
environment, and the results can vary in certain field applications due to a number of factors. OSRAM does
not take over any responsibility, warranty or liability that this results can also achieved by using the devices
under other conditions or when using other LED luminaire types.
• The absence of a dimmer from this chart does not necessarily imply incompatibility.
• Please reference the dimmer manufacturer’s instructions for installation.
• LED luminaires contain several electronic components. Under unfavorable conditions these can lead to
acoustic noise. In case of resonance even low noise can cause audible effect. Possible factors influencing
this are the installation, the design of the luminaire (acoustic resonance effect) as well as the dimmer or the
transformer (harmonics or resonance effect).