Datasheet

ManualsBrandsOSRAM ManualsPhotodiodes & PhototransistorsPhotodiode 1100 nm 60 °

2012-10-15 1

201 2- 10- 1 5

Silicon PIN Photodiode

Silizium-PIN-Fotodiode

Version 1.0

BP 104 S, BP 104 SR

BP 104 SRBP 104 S

Ordering Information

Bestellinformation

Features: Besondere Merkmale:

• Suitable for reflow soldering • Geeignet für Reflow Löten

• Especially suitable for applications from 400 nm to

1100 nm

• Besonders geeignet für Anwendungen im Bereich

von 400 nm bis 1100 nm

• Short switching time (typ. 20 ns) • Kurze Schaltzeit

• Suitable for SMT • SMT-fähig

Applications Anwendungen

• Photointerrupters • Lichtschranken

• Industrial electronics • Industrieelektronik

• For control and drive circuits • Messen / Steuern / Regeln

• IR remote control of hi-fi and TV sets, video tape

recorders, dimmers, remote controls of various

equipment

• IR-Fernsteuerung von Fernseh- und

Rundfunkgeräten, Videorecordern, Lichtdimmern,

Gerätefernsteuerungen

Type: Photocurrent Ordering Code

Typ: Fotostrom Bestellnummer

= 1000 lx, Std. Light A, V

= 5 V

[µA]

BP 104 S 55 (≥ 40) Q65110A2626

BP 104 SR 55 (≥ 40) Q65110A4262

Summary of content (12 pages)

PAGE 1
2012-10-15 Silicon PIN Photodiode Silizium-PIN-Fotodiode Version 1.0 BP 104 S, BP 104 SR BP 104 S BP 104 SR Features: Besondere Merkmale: • Suitable for reflow soldering • Especially suitable for applications from 400 nm to 1100 nm • Short switching time (typ.
PAGE 2
Version 1.0 BP 104 S, BP 104 SR Maximum Ratings (TA = 25 °C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating and storage temperature range Betriebs- und Lagertemperatur Top; Tstg -40 ... 100 °C Reverse voltage Sperrspannung VR 20 V Total power dissipation Verlustleistung Ptot 150 mW Characteristics (TA = 25 °C) Kennwerte Parameter Symbol Bezeichnung Symbol Photocurrent Fotostrom (Ev = 1000 lx, Std. Light A, VR = 5 V) IP Wavelength of max.
PAGE 3
Version 1.0 BP 104 S, BP 104 SR Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Open-circuit voltage Leerlaufspannung (Ev = 1000 lx, Std. Light A) VO 360 (≥ 280) mV Short-circuit current Kurzschlussstrom (Ev = 1000 lx, Std. Light A) ISC 50 µA Rise and fall time Anstiegs- und Abfallzeit (VR = 5 V, RL = 50 Ω, λ = 850 nm) tr, tf 0.02 µs Forward voltage Durchlassspannung (IF = 100 mA, E = 0) VF 1.
PAGE 4
Version 1.
PAGE 5
Version 1.
PAGE 6
Version 1.0 BP 104 S, BP 104 SR Directional Characteristics Winkeldiagramm Srel = f(ϕ) 40 30 20 10 ϕ 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2012-10-15 1.0 0.8 0.6 0.
PAGE 7
Version 1.0 BP 104 S, BP 104 SR Package Outline Maßzeichnung Chip position 1.1 (0.043) 0.9 (0.035) 6.7 (0.264) 6.2 (0.244) 4.5 (0.177) 4.3 (0.169) 0...5 ˚ 0.2 (0.008) 0.1 (0.004) 0.3 (0.012) 1.2 (0.047) 1.1 (0.043) 0...0.1 (0...0.004) BP 104 S 0.9 (0.035) 0.7 (0.028) 1.7 (0.067) 1.5 (0.059) 4.0 (0.157) 3.7 (0.146) 1.6 (0.063) ±0.2 (0.008) Photosensitive area Cathode lead 2.20 (0.087) x 2.20 (0.087) GEOY6861 Dimensions in mm (inch). / Maße in mm (inch).
PAGE 8
Version 1.0 BP 104 S, BP 104 SR Package Outline Maßzeichnung Chip position ˚ 0.2 (0.008) 0.1 (0.004) 1.1 (0.043) 0.9 (0.035) 0...5 0.3 (0.012) 1.2 (0.047) 1.1 (0.043) 0...0.1 (0...0.004) BP 104 SR 6.7 (0.264) 6.2 (0.244) 4.5 (0.177) 4.3 (0.169) 0.9 (0.035) 0.7 (0.028) 1.7 (0.067) 1.5 (0.059) 4.0 (0.157) 3.7 (0.146) 1.6 (0.063) ±0.2 (0.008) Photosensitive area Cathode lead 2.20 (0.087) x 2.20 (0.087) GPLY7049 Dimensions in mm (inch). / Maße in mm (inch).
PAGE 9
Version 1.0 BP 104 S, BP 104 SR Method of Taping Gurtung 0.8 (0.031) 5.5 (0.217) 2 (0.079) 6.9 (0.272) 4 (0.157) 1.5 (0.059) 4.1 (0.161) 12 (0.472) 1.75 (0.069) Cathode/Collector Side OHAY2287 Dimensions in mm (inch). / Maße in mm (inch). Reflow Soldering Profile Reflow-Lötprofil Preconditioning: JEDEC Level 4 acc. to JEDEC J-STD-020D.
PAGE 10
Version 1.
PAGE 11
Version 1.0 BP 104 S, BP 104 SR Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet.