Datasheet

ManualsBrandsOSRAM ManualsLEDs & AccessoriesSMD LED SMD 2 Blue 392 mcd 120 ° 20 mA 3.2 V

Table Of Contents

2014-03-10 1

201 4-03- 10

PointLED

Datasheet

Version 2.1

LB P4SG

top mountreverse mount

With a diameter of just 2 mm, the PointLED is one of

the smallest packages in its class and achieves high

luminous efficacies. Due to its round and flat package,

measuring only 0.775 mm high, it is ideal for

application where space is a sensitive issue.

Mit nur 2 mm Durchmesser gehört die PointLED zu

den kleinsten LED auf dem Markt bei hohen

Effizienzen. Aufgrund ihres runden und flachen

Gehäuses mit nur 0,775 mm Bauhöhe ist sie ideal für

Applikationen mit begrenztem Raum.

Features: Besondere Merkmale:

• Package: white SMT package, colorless clear

silicone resin

• Gehäusetyp: weißes SMT Gehäuse, farbloser

klarer Silikon-Verguss

• Technology: ThinGaN • Technologie: ThinGaN

• Viewing angle at 50 % I

: 120° (horizontal); 120°

(vertical)

• Abstrahlwinkel bei 50 % I

: 120° (horizontal);

120° (vertical)

• Color: blue (470 nm) • Farbe: blau (470 nm)

Applications Anwendungen

• Backlighting • Hinterleuchtung

• Signal and Symbol Luminary • Signal- und Symbolleuchten

Summary of content (22 pages)

PAGE 1
2014-03-10 PointLED Datasheet Version 2.1 LB P4SG reverse mount With a diameter of just 2 mm, the PointLED is one of the smallest packages in its class and achieves high luminous efficacies. Due to its round and flat package, measuring only 0.775 mm high, it is ideal for application where space is a sensitive issue. Mit nur 2 mm Durchmesser gehört die PointLED zu den kleinsten LED auf dem Markt bei hohen Effizienzen.
PAGE 2
Version 2.1 LB P4SG Ordering Information Bestellinformation Type: Mounting methode Luminous Intensity 1) page 21 Ordering Code Typ: Montierbarkeit Lichtstärke Bestellnummer 1) Seite 21 IF = 20 mA IV [mcd] LB P4SG-S2U1-35-1 reverse mount 224 ... 560 Q65110A8252 LB P4SG-S2U1-35-SF top mount 224 ... 560 Q65110A8253 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5).
PAGE 3
Version 2.1 LB P4SG Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 100 °C Storage temperature range Lagertemperatur Tstg -40 ... 100 °C Junction temperature Sperrschichttemperatur Tj 125 °C Forward current Durchlassstrom (TS = 25 °C) IF 5 ... 20 mA Surge current Stoßstrom (t <= 10 μs; D = 0.
PAGE 4
Version 2.1 LB P4SG Characteristics (TS = 25 °C; IF = 20 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Wavelength at peak emission Wellenlänge d. emittierten Lichtes (typ.) λpeak 465 nm Dominant Wavelength 3) page 21 Dominantwellenlänge 3) Seite 21 (min.) (typ.) (max.) λdom λdom λdom 464 470 476 nm nm nm Spectral bandwidth at 50% Irel max Spektrale Bandbreite b. 50% Irel max (typ.) Δλ 25 nm Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.
PAGE 5
Version 2.1 LB P4SG Brightness Groups Helligkeitsgruppen Luminous Intensity Luminous Flux 7) page 21 Lichtstärke 1) Seite 21 Lichtstrom 7) Seite 21 Group Luminous Intensity Gruppe Lichtstärke (min.) Iv [mcd] (max.) Iv [mcd] (typ.) ΦV [mlm] S2 224 280 760 T1 280 355 950 T2 355 450 1210 U1 450 560 1520 1) page 21 1) page 21 1) Seite 21 Note: The standard shipping format for serial types includes a grouping of only a few brightness groups.
PAGE 6
Version 2.1 LB P4SG Group Name on Label Gruppenbezeichnung auf Etikett Example: S2-3-4 Beispiel: S2-3-4 Brightness Helligkeit Wavelength Wellenlänge Forward Voltage Durchlassspannung S2 3 4 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
PAGE 7
Version 2.1 LB P4SG Relative Spectral Emission - V(λ) = Standard eye response curve 7) page 21 Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 7) Seite 21 Irel = f (λ); TS = 25 °C; IF = 20 mA OHL00192 100 I rel % 80 Vλ 60 blue true green 40 20 0 400 450 500 550 650 600 nm 700 λ Radiation Characteristics 7) page 21 Abstrahlcharakteristik 7) Seite 21 Irel = f (ϕ); TS = 25 °C 40˚ 30˚ 20˚ 10˚ 0˚ ϕ 50˚ OHL01660 1.0 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 0 90˚ 100˚ 1.
PAGE 8
Version 2.1 LB P4SG Relative Luminous Intensity 7) page 21 , 8) page 21 Relative Lichtstärke 7) Seite 21 , 8) Seite 21 IV/IV(20 mA) = f(IF); TS = 25 °C Forward Current 7) page 21 Durchlassstrom 7) Seite 21 IF = f (VF); TS = 25 °C OHL02359 10 2 IF I V (20 mA) 5 10 1 10 0 5 5 10 0 2.5 3 3.5 4 10 -1 0 10 4.
PAGE 9
Version 2.1 LB P4SG Relative Luminous Intensity 7) page 21 Relative Lichtstärke 7) Seite 21 IV/IV(25)°C = f(Tj); IF = 20 mA Relative Forward Voltage 7) page 21 Relative Vorwärtsspannung 7) Seite 21 ΔVF = VF - VF(25 °C) = f(Tj); IF = 20 mA ΔVF OHL02912 0.4 V Iv OHL-2013-01-Iv 1,4 Iv(25°C) 0.3 1,2 0.2 1,0 0.1 0,8 0 0,6 -0.1 0,4 true green blue 0,2 -0.2 -0.
PAGE 10
Version 2.1 LB P4SG Max. Permissible Forward Current Max. zulässiger Durchlassstrom IF = f (T) IF OHL02567 25 mA TS 20 TA 15 10 5 TA temp. ambient TS temp. solder point 0 0 20 40 60 80 ˚C 100 T Permissible Pulse Handling Capability Zulässige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 85 °C Permissible Pulse Handling Capability Zulässige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 25 °C 0.25 IF A OHL02565 t 0.25 IF A tP D = TP IF T 0.20 0.10 0.005 0.01 0.02 0.05 0.
PAGE 11
Version 2.
PAGE 12
Version 2.1 LB P4SG Recommended Solder Pad 9) page 21 Empfohlenes Lötpaddesign 9) Seite 21 Reflow soldering Reflow-Löten Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation 3.6 (0.142) 0.025 (0.001) 0.7 (0.028) 2.6 (0.102) (ø2.1 (0.083) +0.1 (0.004) ) (0.5 (0.020)) Bauteil positioniert, Rückseite Component location on pad, backside Hole in PCB Lötstoplack Solder resist OHAY1307 Reflow soldering Reflow-Löten 0.7 (0.028) 2.6 (0.102) 0.8 (0.031) 0.2 (0.
PAGE 13
Version 2.1 LB P4SG Note: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning. Anm.: Um eine verbesserte Lötstellenkontaktierung zu erreichen, empfehlen wir, unter StandardStickstoffatmosphäre zu löten. Das Gehäuse ist für Ultraschallreinigung nicht geeignet.
PAGE 14
Version 2.1 LB P4SG Reflow Soldering Profile Reflow-Lötprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.
PAGE 15
Version 2.1 LB P4SG 5˚ max. 3.75 (0.148) ±0.05 (0.002) 0.3 (0.012) max. 8.1 (0.319) ±0.1 (0.004) 3.5 (0.138) ±0.05 (0.002) 2 (0.079) ±0.05 (0.002) 1.75 (0.069) ±0.05 (0.002) 1.5 (0.059) +0.1 (0.004) 4 (0.157) 1.1 (0.043) ±0.05 (0.002) Cathode/Collector Side 2.8 (0.110) ±0.05 (0.002) Taping 9) page 21 Gurtung 9) Seite 21 reverse mount / durch ein Loch in der Platine emittierend 0.8 (0.031) ±0.05 (0.002) 0.45 (0.018) ±0.05 (0.002) 1.5 (0.059) ±0.05 (0.002) 0.95 (0.037) ±0.05 (0.
PAGE 16
Version 2.1 LB P4SG Tape and Reel Gurtverpackung 12 mm tape with 3000 pcs. on ∅ 180 mm reel, 12000 pcs. on ∅ 330 mm reel W1 D0 P0 A N F W E 13.0 ±0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm (inch) Tape dim ensions in m m ( inch) W P0 P1 P2 D0 E F 12 +0.3/-0.1 4 ± 0.1 (0.157 ± 0.004) 4 ± 0.1 (0.157 ± 0.004) or 8 ± 0.1 (0.315 ± 0.004) 2 ± 0.
PAGE 17
Version 2.1 Reel dim ensions in m m ( inch) LB P4SG A W Nmin W1 W2max 330 (13) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.
PAGE 18
Version 2.1 LB P4SG Transportation Packing and Materials Kartonverpackung und Materialien 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ Mu P- 44 (9D ) 4 20 23 3G (6P ) LO T 00 D/C : 01 998 NO : 12 O 021 H1 210 BA TC H Se SR mi AM co nd O uc pt to o rs NO : ). 5 14 2 110 0 (Q) QT Y: see labe N (1T ) O NO : TI PR OD U (X) A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar .
PAGE 19
Version 2.1 LB P4SG Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 20
Version 2.1 LB P4SG Date of Change: 2013-11-15 Revision Date: 2014-03-10 Version Subjects Date of change 2.0 OS-IN-2013-031 2013-11-15 Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 21
Version 2.1 LB P4SG Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (acc. to GUM with a coverage factor of k = 3). 1) Helligkeit: Helligkeitswerte werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 8 % und einer erweiterten Messunsicherheit von ± 11 % gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).