Datasheet

ManualsBrandsOSRAM ManualsHighPower-LEDsHighPower LED Blue 2 W 120 ° 3.05 V 2000 mA

2013-06-15 1

201 3- 06- 1 5

OSLON Square

Datasheet

Version 1.1

LD CQAR

This most compact high-power LED (2 W class) allows

dense clustering and simple circuit designs. Its

extremely low thermal resistance helps to keep the

efficiency remarkably high even when driven at high

currents. High reliability. Long lifetime.

Diese außerordentlich kompakte Hochleistungs-LED

(2-W-Klasse) erlaubt eine dichte Anordnung und

einfache Schaltungsentwürfe. Der äußerst niedrige

Wärmewiderstand sorgt für einen hohen

Wirkungsgrad auch bei hohen Strömen. Hohe

Zuverlässigkeit. Lange Lebensdauer.

Features: Besondere Merkmale:

• Package: SMT ceramic package with silicone

resin and silicone lens.

• Gehäusetyp: SMT-Keramikgehäuse mit

Silikonverguss und -linse

• Viewing angle at 50 % I

: 120° • Abstrahlwinkel bei 50 % I

: 120°

• Color: 450 nm ( deep blue ) • Farbe: 450 nm ( deep blue )

• Radiant Flux: typ. 1200 mW • Strahlungsfluss: typ. 1200 mW

• Radiant Efficiency: typ. 56 % • Lichtausbeute: typ. 56 %

• Corrosion Robustness: Superior Corrosion

Robustness

• Korrosionsstabilität: Höchste

Korrosionsbeständigkeit

Applications Anwendungen

• Architectural lighting • Architekturbeleuchtung

• Stage lighting • Bühnenbeleuchtung

• Shop lighting • Ladenbeleuchtung

• Color changing fixtures • farbveränderliche Lichtquellen

• Remote-phosphor fixtures • Remote-Phosphor Lichtquellen

Summary of content (23 pages)

PAGE 1
2013-06-15 OSLON Square® Datasheet Version 1.1 LD CQAR This most compact high-power LED (2 W class) allows dense clustering and simple circuit designs. Its extremely low thermal resistance helps to keep the efficiency remarkably high even when driven at high currents. High reliability. Long lifetime. Diese außerordentlich kompakte Hochleistungs-LED (2-W-Klasse) erlaubt eine dichte Anordnung und einfache Schaltungsentwürfe.
PAGE 2
Version 1.1 LD CQAR Ordering Information Bestellinformation Type: Radiant Power 1) page 22 Ordering Code Typ: Strahlungsleistung 1) Seite 22 Bestellnummer IF = 700 mA ΦE [mW] LD CQAR-APAR-24-1 Note: 1120 ... 1400 Q65111A3374 The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g.
PAGE 3
Version 1.1 LD CQAR Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 120 °C Storage temperature range Lagertemperatur Tstg -40 ... 120 °C Junction temperature absolute * Sperrschichttemperatur absolut * Tj, abs 150 °C Junction temperature Sperrschichttemperatur Tj 135 °C Forward current Durchlassstrom (TS = 25 °C) IF 200 ...
PAGE 4
Version 1.1 LD CQAR Characteristics (TS = 25 °C; IF = 700 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Wavelength at peak emission Wellenlänge d. emittierten Lichtes (typ.) λpeak 445 nm Dominant Wavelength 3) page 22 Dominantwellenlänge 3) Seite 22 (min.) (typ.) (max.) λdom λdom λdom 444 450 457 nm nm nm Spectral bandwidth at 50% Irel max Spektrale Bandbreite b. 50% Irel max (typ.) Δλ 18 nm Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.
PAGE 5
Version 1.1 LD CQAR Brightness Groups Helligkeitsgruppen Radiant Power 1) page 22 Group Gruppe Strahlungsleistung 1) Seite 22 Radiant Power 1) page 22 Strahlungsleistung 1) Seite 22 (min.) ΦE [mW] (max.) ΦE [mW] VO 1035 1120 AP 1120 1210 AQ 1210 1300 AR 1300 1400 Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups.
PAGE 6
Version 1.1 LD CQAR Group Name on Label Gruppenbezeichnung auf Etikett Example: AP-3-L1 Beispiel: AP-3-L1 Brightness Helligkeit Wavelength Wellenlänge Forward Voltage Durchlassspannung AP 3 L1 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
PAGE 7
Version 1.1 LD CQAR Relative Spectral Emission - V(λ) = Standard eye response curve 6) page 22 Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 6) Seite 22 Φrel = f (λ); TS = 25 °C; IF = 700 mA Φrel OHL06116 1.0 : Φrel (deep blue) : Vλ 0.8 0.6 0.4 0.2 0.
PAGE 8
Version 1.1 LD CQAR Forward Current 6) page 22 Durchlassstrom 6) Seite 22 Relative Radiant Power 6) page 22 , 7) page 22 Relative Strahlungsleistung 6) Seite 22 , 7) Seite 22 IF = f (VF); TS = 25 °C IF (mA) ΦE/ΦE(700 mA) = f(IF); TS = 25 °C ΦE ΦE (700 mA) OHL06025 2000 1800 OHL06055 2.5 1600 2.0 1400 1200 1.5 1000 1.0 800 600 0.5 400 0.0 20 0 40 0 60 0 80 0 10 0 12 0 0 14 0 0 16 0 00 18 0 20 0 00 200 2.4 2.6 2.8 3.0 3.2 3.4 3.
PAGE 9
Version 1.1 LD CQAR Relative Forward Voltage 6) page 22 Relative Vorwärtsspannung 6) Seite 22 Relative Radiant Power 6) page 22 Relative Strahlungsleistung 6) Seite 22 ΔVF = VF - VF(25°C) = f(Tj); IF = 700 mA ΔV F (V ) ΦE/ΦE(25 °C) = f(Tj); IF = 700 mA ΦE OHL06172 0.20 OHL06148 1.2 ΦE (25°C ) 0.15 1.0 0.10 0.8 0.05 0.00 0.6 -0.05 0.4 -0.10 0.2 -0.15 -0.20 -40 -20 0 20 40 60 80 0.
PAGE 10
Version 1.1 LD CQAR Max. Permissible Forward Current Max.
PAGE 11
Version 1.1 LD CQAR Package Outline 8) page 22 Maßzeichnung 8) Seite 22 Approximate Weight: 29 mg Gewicht: 29 mg Mark: Cathode Markierung: Kathode ESD information: LED is protected by ESD device which is connected in parallel to LED-Chip. ESD Information: Die LED enthält ein ESD-Bauteil, das parallel zum Chip geschalten ist.
PAGE 12
Version 1.
PAGE 13
Version 1.
PAGE 14
Version 1.1 LD CQAR Note: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. For further information please refer to our Application Note “Handling and Processing Details for Ceramic LEDs“. Anm.: Um eine verbesserte Lötstellenkontaktierung zu erreichen, empfehlen wir, unter StandardStickstoffatmosphäre zu löten. Weitere Informationen finden Sie in der Applikationsschrift „Handling and Processing Details for Ceramic LEDs“.
PAGE 15
Version 1.1 LD CQAR Reflow Soldering Profile Reflow-Lötprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.
PAGE 16
Version 1.
PAGE 17
Version 1.1 LD CQAR Tape and Reel Gurtverpackung 12 mm tape with 600 pcs. on ∅ 180 mm reel W1 D0 P0 A N F W E 13.0 ±0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm (inch) Tape dim ensions in m m ( inch) W P0 P1 P2 D0 E F 12 +0.3/-0.1 4 ± 0.1 (0.157 ± 0.004) 4 ± 0.1 (0.157 ± 0.004) or 8 ± 0.1 (0.315 ± 0.004) 2 ± 0.05 (0.079 ± 0.002) 1.5 ± 0.1 (0.
PAGE 18
Version 1.1 LD CQAR Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 °C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE LE see labe ). (RH idity ˚C < 40 .
PAGE 19
Version 1.1 LD CQAR Transportation Packing and Materials Kartonverpackung und Materialien 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ Mu P- 44 (9D ) 4 20 23 3G (6P ) LO T 00 D/C : 01 998 NO : 12 O 021 H1 210 BA TC H Se SR mi AM co nd O uc pt to o rs NO : ). 5 14 2 110 0 (Q) QT Y: see labe N (1T ) O NO : TI PR OD U (X) A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar .
PAGE 20
Version 1.1 LD CQAR Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 21
Version 1.1 LD CQAR Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you.
PAGE 22
Version 1.1 LD CQAR Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3).