Datasheet

ManualsBrandsOSRAM ManualsHighPower-LEDsHighPower LED Red 1 W 150 ° 2.1 V 1000 mA

2015-01-09 1

2015-0 1-09

OSLON SSL

150

Datasheet

Version 1.3

LH CPDP

This ultra-compact 1 W class LED provides a wide

radiation pattern allowing perfect interaction and

various designs including color mixing LED clusters.

Its low thermal resistance allows this device to be

highly efficient even at high driving currents.

Applications demanding long lifetimes are perfectly

addressed with this highly reliable LED.

Diese äußerst kompakte LED der 1-W-Klasse mit

breiter Abstrahlcharakteristik erlaubt eine perfekte

Interaktion in einer Vielzahl von Designs –

einschließlich der Farbmischung in LED-Clustern. Der

geringe Wärmewiderstand sorgt selbst bei hohen

Strömen für höchste Lichtausbeute. Diese

zuverlässige LED eignet sich besonders für

Applikationen, die eine hohe Lebenserwartung

erfordern.

Features: Besondere Merkmale:

• Package: SMT ceramic package with silicone

resin and silicone lens

• Gehäusetyp: SMT-Keramikgehäuse mit

Silikonverguss und -linse

• Viewing angle at 50 % I

: 150° • Abstrahlwinkel bei 50 % I

: 150°

Robustness

• Korrosionsstabilität: Höchste

Korrosionsbeständigkeit

• Lumen Maintenance: Test results according to

IESNA LM-80 available

• Lichtstromerhaltung: Testergebnisse nach

IESNA LM-80 verfügbar

Applications Anwendungen

• Accent and effect lighting • Akzent- und Effektbeleuchtung

• Horticultural Lighting • Gewächshausbeleuchtung

• Color: 660 nm ( hyper red ) • Farbe: 660 nm ( hyperrot )

• Radiant Flux: typ. 365 mW • Strahlungsfluss: typ. 365 mW

• Radiant Efficiency: typ. 50 % • Lichtausbeute: typ. 50 %

• Corrosion Robustness: Superior Corrosion

Summary of content (23 pages)

PAGE 1
2015-01-09 OSLON SSL ® 150 Datasheet Version 1.3 LH CPDP This ultra-compact 1 W class LED provides a wide radiation pattern allowing perfect interaction and various designs including color mixing LED clusters. Its low thermal resistance allows this device to be highly efficient even at high driving currents. Applications demanding long lifetimes are perfectly addressed with this highly reliable LED.
PAGE 2
Version 1.3 LH CPDP Ordering Information Bestellinformation Type: Radiant Power 1) page 22 Ordering Code Typ: Strahlungsleistung 1) Seite 22 Bestellnummer IF = 350 mA ΦE [mW] LH CPDP-3T4T-1 355 ... 450 Q65111A2654 LH CPDP-2T3T-1 315 ... 400 Q65111A1765 LH CPDP-1T2T-1 280 ... 355 Q65111A4993 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5).
PAGE 3
Version 1.3 LH CPDP Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 120 °C Storage temperature range Lagertemperatur Tstg -40 ... 120 °C Junction temperature absolute * Sperrschichttemperatur absolut * Tj, abs 160 °C Junction temperature Sperrschichttemperatur Tj 135 °C Forward current Durchlassstrom (TS = 25 °C) IF 100 ...
PAGE 4
Version 1.3 LH CPDP Characteristics (TS = 25 °C; IF = 350 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Wavelength at peak emission Wellenlänge d. emittierten Lichtes (typ.) λpeak 660 nm Centroid Wavelength Zentrumswellenlänge (min.) (typ.) (max.) λcentr λcentr λcentr 646 657 666 nm nm nm Dominant Wavelength 3) page 22 Dominantwellenlänge 3) Seite 22 (typ.) λdom 640 nm Spectral bandwidth at 50% Irel max Spektrale Bandbreite b. 50% Irel max (typ.
PAGE 5
Version 1.3 LH CPDP Brightness Groups Helligkeitsgruppen Radiant Power 1) page 22 Group 1) Seite 22 Radiant Power 1) page 22 Strahlungsleistung 1) Seite 22 Gruppe Strahlungsleistung (min.) ΦE [mW] (max.) ΦE [mW] 2T 315 355 3T 355 400 4T 400 450 Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered. Anm.
PAGE 6
Version 1.3 LH CPDP Group Name on Label Gruppenbezeichnung auf Etikett Example: 1T-1 Beispiel: 1T-1 Brightness Helligkeit Wavelength Wellenlänge 1T 1 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
PAGE 7
Version 1.3 LH CPDP Relative Spectral Emission - V(λ) = Standard eye response curve 6) page 22 Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 6) Seite 22 Φrel = f (λ); TS = 25 °C; IF = 350 mA OHL06117 1.0 Φrel : Φrel (hyperred) : Vλ 0.8 0.6 0.4 0.2 0.
PAGE 8
Version 1.3 LH CPDP Forward Current 6) page 22 , 7) page 22 Durchlassstrom 6) Seite 22 , 7) Seite 22 IF = f (VF); TS = 25 °C Relative Radiant Power 6) page 22 , 7) page 22 Relative Strahlungsleistung 6) Seite 22 , 7) Seite 22 ΦE/ΦE (350 mA) = f(IF); TS = 25 °C OHL06008 1000 ΦE IF (mA) OHL06035 3.0 ΦE (350 mA) 2.5 800 2.0 600 1.5 1.0 400 0.5 200 2.6 IF (mA) VF (V) 2015-01-09 8 10 00 2.4 80 0 2.2 60 0 2.0 40 0 1.8 20 0 0.0 1.
PAGE 9
Version 1.3 LH CPDP Relative Forward Voltage 6) page 22 Relative Vorwärtsspannung 6) Seite 22 ΔVF = VF - VF(25 °C) = f(Tj); IF = 350 mA Relative Radiant Power 6) page 22 Relative Strahlungsleistung 6) Seite 22 ΦE/ΦE (25 °C) = f(Tj); IF = 350 mA OHL06028 0.25 ΦE ΦE (25 °C) ∆VF (V) 0.20 1.2 OHL06064 1.0 0.15 0.8 0.10 0.6 0.05 0.00 0.4 -0.05 0.2 -0.10 0.
PAGE 10
Version 1.3 LH CPDP Max. Permissible Forward Current Max. zulässiger Durchlassstrom IF = f (T) OHL05420 I F (mA) 1000 900 800 700 600 500 400 300 200 100 Do not use below 100 mA 0 0 20 40 60 80 100 120 TS (°C) Permissible Pulse Handling Capability Zulässige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 25 °C IF 2.1 A 1.9 Permissible Pulse Handling Capability Zulässige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 85 °C OHL04184 t D = TP tP IF IF T 1.9 D= 1.7 1.8 1.7 1.6 1.
PAGE 11
Version 1.3 LH CPDP Package Outline 8) page 22 Maßzeichnung 8) Seite 22 Approximate Weight: 25 mg Gewicht: 25 mg Mark: Cathode Markierung: Kathode ESD information: LED is protected by ESD device which is connected in parallel to LED-Chip. ESD Information: Die LED enthält ein ESD-Bauteil, das parallel zum Chip geschaltet ist.
PAGE 12
Version 1.
PAGE 13
Version 1.
PAGE 14
Version 1.3 LH CPDP Note: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. For further information please refer to our Application Note “Handling and Processing Details for Ceramic LEDs“. Anm.: Um eine verbesserte Lötstellenkontaktierung zu erreichen, empfehlen wir, unter StandardStickstoffatmosphäre zu löten. Weitere Informationen finden Sie in der Applikationsschrift „Handling and Processing Details for Ceramic LEDs“.
PAGE 15
Version 1.3 LH CPDP Reflow Soldering Profile Reflow-Lötprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.
PAGE 16
Version 1.
PAGE 17
Version 1.3 LH CPDP Tape and Reel Gurtverpackung 12 mm tape with 600 pcs. on ∅ 180 mm reel W1 D0 P0 A N F W E 13.0 ±0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm Tape dim ensions in m m W P0 12 + 0.3 / - 0.1 4 ± 0.1 P1 P2 D0 E F 4 ± 0.1 or 8 ± 0.1 2 ± 0.05 1.5 ± 0.1 1.75 ± 0.1 5.5 ± 0.
PAGE 18
Version 1.3 LH CPDP Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto EX A RoHS Compliant (6P) BATCH NO: 1234567890 (1T) LOT NO: 1234567890 BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors MP ML Temp ST X XXX °C X (9D) D/C: 1234 Pack: RXX LE DEMY XXX X_X123_1234.
PAGE 19
Version 1.3 LH CPDP Transportation Packing and Materials Kartonverpackung und Materialien Barcode label DE MY 8 1 T6 PL 76 R1 Q- lti LS TO Y 1+ POU GR (G) Mu : 01 (9D ) D/C 21 00 21 99 8 : 4 20 Y: 23 LO (X) PR OD NO ) 11 00 (1T QT (Q) H Se 3G H1 BA TC ) : 12 (6P 5 NO T 14 2 O SR mi AM co nd O uc pt to o rs NO ). : see labe 44 l k, N O TI U A C 00 L VE LE code (RH blan If y bar .
PAGE 20
Version 1.3 LH CPDP Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 21
Version 1.3 LH CPDP Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you.
PAGE 22
Version 1.3 LH CPDP Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (acc. to GUM with a coverage factor of k = 3). 1) Helligkeit: Helligkeitswerte werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 8 % und einer erweiterten Messunsicherheit von ± 11 % gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).