Datasheet
LINEARlight - LM01A
Data Sheet
www.osram.com/LED-Systems
Picture for
Datasheet
is missing
!!!
Benefits
Low profile
Minimal heat generation
Wide viewing angle
Easy connection with OSRAM
CONNECTsystem
Applications
Path illumination, contour accentuation
Edge-coupling of transparent or diffuse
materials
Emergency / rescue signs
Color Voltage
[V DC]*
Power
[W]*
Radiance
Angle [°]*
Wavelength [nm]
Color Temp [K]*
Lum. Flux
[lm]*
Current
[A]*
Product
Number of
LEDs
Technical Operating Data
white 10 4,0 120 5400 K 1110,4LM01A-W3F-854 32
white 10 4,0 120 4000 K 1110,4LM01A-W3F-840 32
white 10 4,0 120 2700 K 880,4LM01A-W3F-827 32
red 10 4,0 120 617 nm 780,4LM01A-A1 32
orange 10 4,0 120 606 nm 980,4LM01A-O1 32
yellow 10 4,0 120 587 nm 690,4LM01A-Y1 32
green 10 4,0 120 525 nm 570,4LM01A-T2 32
blue 10 4,0 120 470 nm 340,4LM01A-B2 32
All Data are related to the entire module
Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily
correspond to the actual parameters of each single product which could differ from the typical data.
Preliminary Data **) Discontinued
*)
+)
Technical Features
Modules optimised for use with OSRAM
OPTOTRONIC® power supplies
Parallel connection up to three modules
Only parallel connection allowed
Smallest unit of 4 LEDs can be cut out at regular
intervals without damaging the rest of the module
Mounting hole (Ø 4 mm) allows easy installation
with screws or standard circuit board support
hardware
Adaptable lens system OP 4x1-20 available, see
additional datasheet
Size of printed circuit board (L x W x H):
448 mm x 10 mm x 4 mm
Size of smallest unit 4 LED (L x W):
56 mm x 10 mm
Also available: LINEARlight Flex on flexible
printed circuit Board for long applications :
please refer to Datasheet LM10A or LM11A
Up to 50,000 h lifetime
Page 1 of 4
LM01A - 09.05.2011