Datasheet

Assembly Information

Solder connections should only be performed on designated solder pads (marked "10V +/-"). During soldering, do not exceed the
maximum soldering time of 10 seconds and the maximum soldering temperature of 260°C.

Each module can be separated into sub modules of 4 LEDs each by carefully sawing or cutting at the marked lines

For the connection we also offer the OSRAM Connect System: Feeder LM-2PIN with cables of 500 mm and the Connector LM-
CONN for the connection of 2 modules. The feeder and the connector can be used for the connection at the ends and the sub
modules.
Productgroup Productname EAN *
S-Unit *
Ordering Guide
LINEARlight LM01A-W3F-854 4008321387950 10
LINEARlight LM01A-W3F-840 4008321343413 10
LINEARlight LM01A-W3F-827 4008321372390 10
LINEARlight LM01A-A1 4050300887128 10
LINEARlight LM01A-O1 4050300888040 10
LINEARlight LM01A-Y1 4008321015969 10
LINEARlight LM01A-T2 4050300887845 10
LINEARlight LM01A-B2 4008321313652 10
EAN: Ordering number per single module
S-Unit: Modules per shipping unit
*)
Note: Typical performance data are subject to change without any further notice, particularly as LED technology evolves.
Related and Further Information
OSRAM LED systems

www.osram.com/led-systems
A new approach to light

153 S006 GB
www.osram.com/led-systems-downloads
OPTOTRONIC® Technical Guide

130 T008 GB www.osram.com/ecg-downloads
OPTOTRONIC® Data Sheets

http://catalog.myosram.com
Eulumdat Files

www.osram.com/led-systems-downloads
New standards for LED control gear

130 W011 GB
www.osram.com/ecg-download
Sales and Technical Support
Sales and technical support is given by the
local OSRAM subsidiaries.
On our world wide homepage all OSRAM
subsidiaries are listed with complete
address and phone numbers.
OSRAM GmbH
Hellabrunner Strasse 1
D - 81536 München
Germany
www.osram.com
[phone]
Page 4 of 4
LM01A - 09.05.2011