Datasheet

ManualsBrandsOSRAM ManualsLEDs & AccessoriesSMD LED PLCC4 White 1680 mcd 120 ° 30 mA 3.3 V

2013-08-22 1

201 3-08- 22

Power TOPLED

Datasheet

Version 1.0

LW E6SG

PowerTOPLED, a powerful member of the TOPLED

family. Thanks to their high luminous efficacy, the

LEDs are ideal for rear light clusters and indicators on

vehicles and for display panels for traffic control

systems.

PowerTOPLED, ein leistungsstarkes Mitglied der

TOPLED Familie. Dank der hohen Lichtausbeute

eignen sie sich ideal für Heckleuchten und Indikatoren

an Fahrzeugen und für Display-Panels in

Verkehrsleitsysteme.

Features: Besondere Merkmale:

• Package: white PLCC-4 package, colored

diffused silicone resin

• Gehäusetyp: weisses PLCC-4 Gehäuse, farbiger

diffuser Silikon-Verguss

• Technology: ThinGaN • Technologie: ThinGaN

• Viewing angle at 50 % I

: 120° (Lambertian

Emitter)

• Abstrahlwinkel bei 50 % I

: 120° (Lambertscher

Strahler)

• Color: Cx = 0.33, Cy = 0.33 acc. to CIE 1931

(white)

• Farbe: Cx = 0.33, Cy = 0.33 nach CIE 1931 (weiß)

Applications Anwendungen

• Automotive Lighting Interior and Exterior • Automobilbeleuchtung innen und außen

• Industrial illumination • Industrie-Beleuchtung

• Signal and Symbol Luminary • Signal- und Symbolleuchten

• Reading Lamps • Leselampen

Summary of content (23 pages)

PAGE 1
2013-08-22 Power TOPLED Datasheet Version 1.0 LW E6SG PowerTOPLED, a powerful member of the TOPLED family. Thanks to their high luminous efficacy, the LEDs are ideal for rear light clusters and indicators on vehicles and for display panels for traffic control systems. PowerTOPLED, ein leistungsstarkes Mitglied der TOPLED Familie. Dank der hohen Lichtausbeute eignen sie sich ideal für Heckleuchten und Indikatoren an Fahrzeugen und für Display-Panels in Verkehrsleitsysteme.
PAGE 2
Version 1.0 LW E6SG Ordering Information Bestellinformation Type: Luminous Intensity Ordering Code Typ: Lichtstärke 1) Seite 22 Bestellnummer 1) page 22 IF = 30 mA IV [mcd] LW E6SG-AABA-JKPL-1 Note: 1120 ... 2240 Q65110A8964 The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g.
PAGE 3
Version 1.0 LW E6SG Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 110 °C Storage temperature range Lagertemperatur Tstg -40 ... 110 °C Junction temperature Sperrschichttemperatur Tj 125 °C Junction Temperature Sperrschichttemperatur Tj >150 for short term applications °C Forward current Durchlassstrom (TS = 25 °C) IF 5 ... 50 mA Surge current Stoßstrom (t <= 10 μs; D = 0.
PAGE 4
Version 1.0 LW E6SG Characteristics (TS = 25 °C; IF = 30 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit (typ.) (typ.) Cx Cy 0.33 0.33 - Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2ϕ 120 ° Forward voltage 3) page 22 Durchlassspannung 3) Seite 22 (min.) (typ.) (max.) VF VF VF 2.90 3.30 3.80 V V V IR not designed for reverse operation Chromaticity coordinates acc.
PAGE 5
Version 1.0 LW E6SG Brightness Groups Helligkeitsgruppen Group Luminous Intensity Gruppe Lichtstärke 1) page 22 Luminous Intensity Luminous Flux 6) page 22 Lichtstärke 1) Seite 22 Lichtstrom 6) Seite 22 1) page 22 1) Seite 22 (min.) Iv [mcd] (max.) Iv [mcd] (typ.
PAGE 6
Version 1.0 LW E6SG Chromaticity Coordinate Groups 2) page 22 Farbortgruppen 2) Seite 22 0.41 Cy PL 530 OL 0.35 540 510 NL 550 0.7 560 0.6 + 0.33 ML 0.31 LL MK 570 500 580 590 600 610 620 630 E 490 0.27 480 470 460 450 0 JK 0.25 0.23 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Cx 0.21 0.25 0.19 0.37 0.1 KK 0.31 0.2 0.29 0.3 JL NK LK KL 0.29 0.27 0.5 0.4 PK OK 0.35 520 Cy 0.8 0 0.39 0.37 0.33 0.
PAGE 7
Version 1.0 Group Gruppe KK LL 2013-08-22 Cx LW E6SG Cy Group Gruppe NL Cx Cy Group Gruppe Cy 0.3005 0.2825 0.3288 0.3282 0.3484 0.3388 0.3045 0.2715 0.3288 0.3453 0.3484 0.3571 0.3100 0.2970 0.3386 0.3426 0.3582 0.3542 0.3386 0.3591 0.3582 0.3715 0.3288 0.3081 0.3130 0.2840 0.3070 0.3120 0.3100 0.2970 0.3288 0.3282 0.3189 0.3302 0.3386 0.3235 0.3197 0.3131 0.3386 0.
PAGE 8
Version 1.0 LW E6SG Group Name on Label Gruppenbezeichnung auf Etikett Example: AA-JK-4 Beispiel: AA-JK-4 Brightness Helligkeit Chromaticity Coordinate Farbort Forward Voltage Durchlassspannung AA JK 4 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
PAGE 9
Version 1.0 LW E6SG Relative Spectral Emission - V(λ) = Standard eye response curve 6) page 22 Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 6) Seite 22 Irel = f (λ); T S = 25 °C; IF = 30 mA OHL01461 100 % I rel 80 Vλ 60 40 20 0 400 450 500 550 600 650 700 nm 750 λ Radiation Characteristics 6) page 22 Abstrahlcharakteristik 6) Seite 22 Irel = f (ϕ); T S = 25 °C 40˚ 30˚ 20˚ 10˚ 0˚ ϕ 50˚ OHL01660 1.0 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 0 90˚ 100˚ 1.0 2013-08-22 0.
PAGE 10
Version 1.0 LW E6SG Forward Current 6) page 22 Durchlassstrom 6) Seite 22 Relative Luminous Intensity 6) page 22 , 7) page 22 Relative Lichtstärke 6) Seite 22 , 7) Seite 22 IF = f (VF); TS = 25 °C IV/IV(30 mA) = f(IF); TS = 25 °C OHL03553 2 IF 10 mA I V (30 mA) 5 10 1 10 0 5 5 10 0 2.5 3 3.5 4 10 -1 0 10 4.5 V 5 VF ΔCx, ΔCy = f(IF); TS = 25 °C OHL01490 0.335 0.330 0.325 Cx 0.320 0.315 Cy 0.310 0.305 0.300 0.
PAGE 11
Version 1.0 LW E6SG Relative Forward Voltage 6) page 22 Relative Vorwärtsspannung 6) Seite 22 Relative Luminous Intensity 6) page 22 Relative Lichtstärke 6) Seite 22 ΔVF = VF - VF(25°C) = f(Tj); IF = 30 mA ΔVF IV/IV(25)°C = f(Tj); IF = 30 mA OHL02397 0.4 V I V (25 ˚C) 0.3 0.2 1.0 0.1 0.8 0 0.6 -0.1 0.4 -0.2 0.2 -0.3 -60 -40 -20 0 20 40 60 0 -60 -40 -20 0 ˚C 100 Chromaticity Coordinate Shift 6) page 22 Farbortverschiebung 6) Seite 22 ΔCx, ΔCy = f(Tj); IF = 30 mA OHL03527 0.
PAGE 12
Version 1.0 LW E6SG Max. Permissible Forward Current Max. zulässiger Durchlassstrom IF = f (T) IF OHL01362 60 mA 50 40 TA TS 30 20 10 TA temp. ambient TS temp. solder point 0 0 20 40 60 80 100 ˚C 120 T Permissible Pulse Handling Capability Zulässige Impulsbelastbarkeit IF = f(tp) Permissible Pulse Handling Capability Zulässige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 25 °C 0.35 IF A 0.25 0.20 0.15 D: Duty cycle, TS = 85 °C OHL01503 t D = TP 0.35 IF A tP IF T D= 0.
PAGE 13
Version 1.
PAGE 14
Version 1.0 LW E6SG Recommended Solder Pad 8) page 22 Empfohlenes Lötpaddesign 8) Seite 22 Reflow soldering Reflow-Löten Reflow Soldering / Reflow Löten Fläche darf bei Verwendung von TOPLED® elektrisch nicht beschaltet werden. For TOPLED® assembly do not use this area for electrical contact Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation 3.3 (0.130) 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.
PAGE 15
Version 1.0 LW E6SG Reflow Soldering Profile Reflow-Lötprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.
PAGE 16
Version 1.0 LW E6SG Method of Taping 8) page 22 Gurtung 8) Seite 22 2.9 (0.114) 4 (0.157) 2013-08-22 16 8 (0.315) Cathode/Collector Marking 1.75 (0.069) 2 (0.079) 3.5 (0.138) 4 (0.157) 3.6 (0.142) 1.5 (0.
PAGE 17
Version 1.0 LW E6SG Tape and Reel Gurtverpackung 8 mm tape with 2000 pcs. on ∅ 180 mm reel, 8000 pcs. on ∅ 330 mm reel W1 D0 P0 A N F W E 13.0 ±0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm (inch) Tape dim ensions in m m ( inch) W P0 P1 P2 D0 E F 8 +0.3/-0.1 4 ± 0.1 (0.157 ± 0.004) 2 ± 0.05 (0.079 ± 0.002) or 4 ± 0.1 (0.157 ± 0.004) 2 ± 0.05 (0.
PAGE 18
Version 1.0 LW E6SG Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 °C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE LE see labe ). (RH idity ˚C < 40 .
PAGE 19
Version 1.0 LW E6SG Transportation Packing and Materials Kartonverpackung und Materialien 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ Mu P- 44 (9D ) 4 20 23 3G (6P ) LO T 00 D/C : 01 998 NO : 12 O 021 H1 210 BA TC H Se SR mi AM co nd O uc pt to o rs NO : ). 5 14 2 110 0 (Q) QT Y: see labe N (1T ) O NO : TI PR OD U (X) A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar .
PAGE 20
Version 1.0 LW E6SG Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 21
Version 1.0 LW E6SG Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you.
PAGE 22
Version 1.0 LW E6SG Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (acc. to GUM with a coverage factor of k = 3). 1) Helligkeit: Helligkeitswerte werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 8 % und einer erweiterten Messunsicherheit von ± 11 % gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).