Datasheet

ManualsBrandsOSRAM ManualsDisplaysDot matrix dislplay Yellow 4.72 mm No. of digits: 4

Lead (Pb) Free Product - RoHS Compliant

Red SLR2016

Super-red SLO2016

Green SLG2016

Yellow SLY2016

X/Y Stackable 0.180’’ 4-Digit 5x7 Dot Matrix

Alphanumeric Intelligent Display® Devices with Memory/Decoder/Driver

2006-01-23 1

DESCRIPTION

The SLR/SLO/SLG/SLY2016 is a four digit 5 x 7 dot

matrix display module with a built-in CMOS integrated

circuit. This display is X/Y stackable.

The integrated circuit contains memory, a

128

ASCII ROM decoder, multiplexing circuitry and driv-

ers. Data entry is asynchronous. A display system can be

built using any number of SLR/SLO/SLG/SLY2016 since

each digit can be addressed independently and will con

tinue to display the character last stored until replaced by

another.

System interconnection is very straightforward. Two

address bits (A0, A1) are normally connected to the

like-named inputs of all displays in the system.

Data lines are connected to all SLR/SLO/SLG/SLY2016s

directly and in parallel as is the write line (

WR). The dis-

play will then behave as a write-only memory.

The SLR/SLO/SLG/SLY2016 has several features supe-

rior to competitive devices. 100% burn-in processing

insures that the SLR/SLO/SLG/SLY2016 will function in

more stressful assembly and use environments. True

“blanking” allows the designer to dim the display for more

flexibility of display presentation. Finally the

CLR clear

function will clear the ASCII character RAM.

The character set consists of 128 special ASCII charac-

ters for English, German, Italian, Swedish, Danish, and

Norwegian.

All products are 100% burned-in and tested, then

subjected to out-going AQL’s of 0.25% for brightness

matching, visual alignment and dimensions, 0.065% for

electrical and functional.

FEATURES

• Very Close Multi-line Spacing, 0.4" Centers

•4.72 mm (0.180") 5 x 7 Dot Matrix Characters

• 128 Special ASCII Characters for English,

German, Italian, Swedish, Danish, and

Norwegian Languages

• Wide Viewing Angle: X axis 50° Maximum,

Y Axis ± 75° Maximum

• Fast Access Time, 110 ns at 25°C

• Full Size Display for Stationary Equipment

• Built-in Memory

• Built-in Character Generator

• Built-in Multiplex and LED Drive Circuitry

• Direct Access to Each Digit Independently and Asyn-

chronously

• Clear Function that Clears Character Memory

• True Blanking for Intensity Dimming Applications

• End-stackable, 4-Character Package

• Intensity Coded for Display Uniformity

• Extended Operating Temperature Range:

40°C to +85°C

• Superior ESD Immunity

• 100% Burned-in and Tested

• Wave Solderable

• TTL Compatible over Operating Temperature Range

See Appnotes 18, 19, 22, and 23 at www.osram-os.com

for additional information.

Summary of content (10 pages)

PAGE 1
X/Y Stackable 0.180’’ 4-Digit 5x7 Dot Matrix Alphanumeric Intelligent Display® Devices with Memory/Decoder/Driver Lead (Pb) Free Product - RoHS Compliant Red SLR2016 Super-red SLO2016 Green SLG2016 Yellow SLY2016 DESCRIPTION The SLR/SLO/SLG/SLY2016 is a four digit 5 x 7 dot matrix display module with a built-in CMOS integrated circuit. This display is X/Y stackable. The integrated circuit contains memory, a 128 ASCII ROM decoder, multiplexing circuitry and drivers. Data entry is asynchronous.
PAGE 2
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A Ordering Information Type Color of Emission SLR2016 standard red SLO2016 super-red SLG2016 green SLY2016 yellow Character Height mm (inch) Ordering Code Q68000A8640 Q68000A8641 4.72 (0.180) Q68000A8642 Q68000A8643 SLX2016 Z OSRAM XXYY V EIA Date Code Luminous Intensity Code Pin 1 Indicator 0.46 (0.018) 2.54 (0.100) 12 pl. Non cumulative 5.08 (0.200) Part Number 4.06 (0.160) ±0.51 (0.020) Dimensions in mm (inch) 3.81 (0.
PAGE 3
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A Maximum Ratings Parameter Symbol Value Unit Operating temperature range Top – 40 … + 85 °C Storage temperature range Tstg – 40 … + 100 °C DC Supply Voltage VCC -0.5 to + 7.0 V -0.5 to VCC +0.5 V 260 °C 85 % Input Voltage, Respect to GND (all inputs) Solder Temperature 1.59 mm (0.063“) below seating plane, t < 5.0 s TS Relative Humidity Optical Characteristics at 25°C (VCC=5.
PAGE 4
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A Pin Function Pin Function Pin Function Pin Function Pin Function Pin Function 1 WR Write 8 D3 Data 5 D0 Data 12 BL Display Blank D4 Data 6 D1 Data 13 CLR Clear 7 D2 Data 14 GND 2 A1 Digit Select 9 3 A0 Digit Select 10 D5 Data 4 VCC 11 D6 Data DC Characteristics at 25°C Parameters Min. Typ. Max. Units Conditions VCC 4.5 5.0 5.5 V — ICC Blank — 2.3 3.0 mA VCC=5.0 V ICC (80 dots on) — 80 105 mA VCC=5.
PAGE 5
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A Dimming Circuit Using a 556 and Dimming (Blanking) Timing Typical Loading State Table WR A1 A0 D6 D5 D4 D3 D2 D1 D0 Digit 3 H previously loaded display 1 0 G R E 2 Y E L L L H L L L H L H G R E L L H H L H L H L H G R U E L H L H L L H H L L G L U E L H H H L L L L H L B L U E L L H H L L L H L H B L E E L L L H L H L H H H B L E W L X X see character code VCC = 5 V
PAGE 6
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A Character Set D0 D1 D2 D3 D6 D5 D4 HEX ASCII CODE 0 0 0 0 0 0 1 1 0 1 0 2 0 1 1 3 1 0 0 4 1 0 1 5 1 1 0 6 1 1 1 7 0 0 0 0 0 1 0 0 0 1 0 1 0 0 2 1 1 0 0 3 0 0 1 0 4 1 0 1 0 5 0 1 1 0 6 1 1 1 0 7 0 0 0 1 8 1 0 0 1 9 0 1 0 1 A 1 1 0 1 B 0 0 1 1 C 1 0 1 1 D 0 1 1 1 E 1 1 1 1 F IDCS5087 Notes: 1. High=1 level 2. Low= 0 level 3. Upon power up, the device will initialize in a random state.
PAGE 7
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A Block Diagram Display Rows 0 to 6 3 2 1 0 Row Control Logic & Row Drivers OSC 128 Counter Columns 0 to 19 Timing and Control Logic 7 Counter CLR 7-bit ASCII Code Latches RAM Memory 4 x 7 bit Row Decoder Column Decoder RAM Read Logic D6 D5 D4 D3 D2 D1 D0 Address Bus WR A0 A1 2006-01-23 ROM 128 x 7 bit ASCII Character Decode (4.
PAGE 8
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A use sockets. Standard pin DIP sockets 7.62 mm (0.300") wide with 2.54 mm (0.100") centers work well for single displays. Multiple display assemblies are best handled by longer SIP sockets or DIP sockets when available for uniform package alignment. Socket manufacturers are Aries Electronics, Inc., Frenchtown, NJ; Garry Manufacturing, New Brunswick, NJ; Robinson-Nugent, New Albany, IN; and Samtec Electronic Hardware, New Albany, IN.
PAGE 9
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A Revision History: 2006-01-23 Previous Version: 2005-01-10 Page Subjects (major changes since last revision) Date of change all Lead free device 2006-01-23 2006-01-23 9
PAGE 10
SLR2016, SLO2016, SLG2016, SLY2016, SCD5584A Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.