Datasheet
www.osram.com
ST8A-1.5m – April 2016 Page 1 of 5
SubstiTUBE® Advanced EM – ST8A-1.5m-20W-EM
Datasheet
Product
Color
Colortemp.
[K]
Lum. Flux
[lm]
Voltage [V] /
Frequency [Hz]
Input current [mA]
Power
[W]
Radiance-
Angle [°]
ST8A-1.5m-20W-
865-EM
Cool
Daylight
6500 K
3000
220 - 240 V
50 / 60 Hz
95mA
20 W
150 °
ST8A-1.5m-20W-
840-EM
Cool White
4000 K
3000
ST8A-1.5m-20W-
830-EM
Warm White
3000 K
2750
LED lamp in T8 shape with G13 socket
Weight: 335g
For operation at magnetic ballast without
rewiring
Direct Retrofit for CCG luminaires;
replacement of lamp and included starter
Extremely robust due to polycarbonate
body
Powerfactor > 0.9
Up to 50,000 h lifetime
Switching cycles > 200.000
Color Rendering Index (CRI) > 80
Overpower and short circuit protected
High color homogeneity
RoHS-conformity, no mercury
Not for operation with ECG, not dimmable
Energy Efficiency Class: A++
Innovative LED-lamp, easy and safe to use in CCG
installations as direct retrofit. Energy saving potential of up
to 69% by replacing 1.5 m T8 fluorescent tubes.
Instant 100% light without flickering. No mercury.
Rotatable end caps for alignment of light output direction.
Applicable in warehouses, cold storage, supply rooms,
corridors, industry, stairways, garages, etc; for applications
with high operating hours.
Technical operating data
Technical Features
All Data are related to the entire lamp. Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only
reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data.