User's Manual

- 3 -
Co
ta WPT System User Manual Product Description
COTA WIRELESS POWER TRANSFER SYSTEM USER MANUAL
1PRODUCT DESCRIPTION
The Cota® Wireless Power Transfer System (Cota WPT system) transmits power by using radio waves in the
2.4GHz Industrial, Scientific, and Medical (ISM) band defined by the FCC. It constantly communicates with the
Cota Wireless Power Transfer Client (Cota WPT client) to identify paths along which power can be delivered
and sends power along these paths. Power may be delivered up to a maximum distance of 1 meter from the
front of the Cota Wireless Power Transfer Source (Cota WPT source).
The Cota WPT client is designed to receive RF power from a Cota WPT source and may be used to provide
stable power to a variety of devices through its 5V USB port. The Cota WPT client may be placed on a
table-top or mounted on a wall or other stable surface.
2SET-UP
If the Cota WPT source is to be installed on a wall or in a ceiling, then installation should be performed by
qualified contractors and electricians. Such installations must ensure adequate ventilation around the rear
panel of the Cota WPT source. For tabletop use, place the Cota WPT source in the provided table stand.
Ensure that the Cota WPT source is secured and cannot fall. Avoid tripping hazards by ensuring proper
placement of the AC power cable.
The Cota WPT client shall be placed within 1 meter of the front of the Cota WPT source and at no more than a
60° offset from the front of the Cota WPT source. The Cota WPT client shall be installed in accordance with
the installation guidelines described in DC-1155_Ossia_Cota_WPT_Client_Installation_Guidelines.pdf.
3OPERATING THE COTA WPT SOURCE AND COTA WPT CLIENT
Plug the Cota WPT source into an AC wall outlet and apply power. The light ring on the Cota WPT source
should illuminate, changing colors slowly and continuously while the Cota WPT source is initializing. For light
ring colors and their meanings, see Section 4, Light Ring Status.
3.1 PERFORM POWER NETWORK CHECK
 Connect to the Wi-Fi™.
 Log in to the Cota Web Admin interface on a computer by using the Google Chrome web browser.
 SSID and login information are on a label on the back of your Cota WPT source; connect directly to the
Cot
a Web Admin.