User's Manual

A
B
C
D
E
F
G
I
2. Descriptions of the exterior of the main body
A. Cartridge Assembly
-Area where the cartridge is assembled
B. Inject button
-Press the button to start injection or change the injection speed.
-Long press (for more than 1 sec) the button in initial condition to remove bubbles.
C. Stop button
-Press the button to stop injection.
-Long press the button in initial condition to switch between manual and auto
modes.
D. Decelerate button
-Press the button to reduce the injection speed.
-Long press the button while stopped to return to the initial condition.
-Long press the button in initial condition to set the voice volume.
E. Display
-Area to display the injection speed and the status information.
F. LED
-Area to display the amount of injection and the injection pressure.
G. Power button
-Press the button to turn On/Off the power.
-Short press (for less than 1 sec) the button while stopped or in initial condition to
check the battery level.
H. Grip Cove
-Two types of grips for users’ convenience
I. Speaker
-Speaker to output voices