User Manual

Put liquids in the jar ﬁrst, and then add remaining ingredients.

• Liquid to solid ratio is key!

• Add more liquid if ingredients are not blending properly.

BONUS TIP : For frozen drinks and smoothies, add enough liquid to the point where your

solid ingredients begin to ﬂoat.

Make sure you have assembled your jar correctly if you ﬁnd it is leaking.

• Jar ➙ Sealing Ring ➙ Blade ➙ Jar Bottom

Use the Pulse button for chopping ingredients.

BONUS TIP : Add ingredients in ﬁrst that you wish to process more thoroughly.

Do not remove lid while blender is in use.

• You may remove ﬁller cap to add small ingredients or liquid.

Slicing and Shredding With the Food Processor Accessory

• For best results, use Medium Speed.

BONUS TIP: Do not use Programmed Settings, High Speed, or Reverse Blend.

Food Chopping With the Food Processor Accessory

• For best results, brieﬂy press and release the Pulse Button.

BONUS TIP: Do not use Programmed Settings, High Speed, or Reverse Blend.

Using the Blend-N-Go

Cup

• When installing the 4-point blade, make sure that the grey sealing ring is

placed between the blade and the cup.

To learn more please visit www.oster.com

Printed in Mexico.

P.N.170685 OST32258 CSRM121313

Without Liquid

• Up to 6 large ice cubes

• Use Pulse button until you

achieve desired results

With Liquid

• Fill jar with ice cubes (no ice limits) and

water until ice ﬂoats

• Blend on high until you achieve desired

results then strain off water

For Best Ice Crushing

PER F O R M A N C E B L E N D E R

Helpful

Tips

PAGE 1
P E R F O R M A N C E Helpful Tips B L E N D E R Put liquids in the jar first, and then add remaining ingredients. • Liquid to solid ratio is key! • Add more liquid if ingredients are not blending properly. BONUS TIP: For frozen drinks and smoothies, add enough liquid to the point where your solid ingredients begin to float. Make sure you have assembled your jar correctly if you find it is leaking. • Jar ➙ Sealing Ring ➙ Blade ➙ Jar Bottom Use the Pulse button for chopping ingredients.
PAGE 2
P E R F O R M A N C E B L E N D E R Consejos Útiles Ponga primero líquidos en el vaso y luego agregue los ingredientes restantes. • La relación líquido a sólido es la clave! • Agregue más liquido si los ingredientes no se están mezclando adecuadamente. CONSEJO EXTRA: Para bebidas congeladas y batidos, agregue suficiente líquido hasta que los ingredientes sólidos comiencen a flotar.