User's Manual

ACR-201-G Technical Manual
9
1. Access Point Information:
This section displays the information of the wireless connectivity status of ACR-
201-G. Each field is described below.
State
The connection status of the wireless port
Wireless Network Name (SSID)
Shows the SSID of the AP. To change, see “Wireless Configuration” Tab
 “Wireless Network Name (SSID)”.
Channel
Shows the channel the AP is operating on. To change channel, see
“Wireless Configuration” Tab  “Channel”.
Transmission Rate
The transmission rate established with the access point if in infrastructure
mode or with a station if in ad-hoc mode.
Communication Strength
The indicator of RF communication signal strength.
BSSID
Network Identifier for basic service set
WEP
Shows if WEP (the wireless encryption standard) is enabled or not. To
enable/disable/change WEP settings, see “security” tab  WEP.
2. Bridge Information:
This section displays basic information of the ACR-201-G unit
Bridge Name
Name of the ACR-201-G device
Number of Bridged Clients
Number of clients connected to the ACR-201-G bridge.
MAC Address
This is the MAC Address of the Access Point. It is a unique physical
address assigned to the unit by the manufacturer. MAC Address cannot
be changed.
IP Address
IP Address of the Access Point. To manually change the IP Address or let
the Access Point obtain an IP Address from a DHCP Server automatically,
see “IP Addr” tab.