User's Manual

ACR-201-G Technical Manual
6
System Requirements for Web-based Utility program
A Web-based Configuration Utility is a built-in program of the Wireless Adapter
for changing the configuration settings of the Adapter. For using the ACR-201-G
Web-based Configuration Utility, your computer must meet the following
requirements:
(1) A Web browser must be installed on the computer. The supported Web
browsers include Internet Explorer 5.0 and above, Netscape 6.0 and above, and
Mozilla 1.0 and above. JavaScript for the browser must be enabled.
(2) Ethernet capable computer with RJ-45 port (either built-in or add-on NIC).
(3) A TFTP (Trivial File Transfer Protocol) client must be installed on the
computer. This requirement is only for the purpose of upgrading the software or
firmware.
No installation of any program is needed. See Chapter 3 for detailed information
of configuring the Wireless Adapter. In order to configure it, you need to know the
factory default settings.
The factory default settings are:
IP address: 169.254.98.200
Subnet mask: 255.255.0.0
(Optional) Gateway: 169.254.1.1
User name: admin
Password: public