User's Manual

WiJET-G Technical Manual

RF activities detected on other channels (1, 5, 8, 11). WARNING:

Interference.

Existing channels detected and interference found. The WiJET-G is in a RF

noisy environment, you may have trouble connecting and maintaining

connections to the WiJET-G even if a connection can be made.

Note: WiJET-G updates this information whenever the banner page

appears. In a noisy environment, channel information might get

outdated quickly since the WiJET-G does not monitor channels

continuously.

Once you have turned the WiJET-G on and noted the above information, you can now

configure your computer to connect to the WiJET-G.

3.3 Configuring Computer to Control WiJET-G

Before starting the Presentation Session Manager, the network interface of the

computer must have a valid IP address. For computers running DHCP client mode

while DHCP server is unavailable, it may take a few moments for the computers to

obtain a system IP address. If users cannot obtain a valid IP address for the network

interface, please refer to any network administration references for how to assign IP

address to a network interface/connection.

NOTE: The computer’s network interface must have a valid IP address before PSM

starts.

3.4 Starting WiJET-G Presentation Session Manager

You have to start the WiJET-G Presentation Session Manager (PSM) to control the

WiJET-G. There are two ways to run the WiJET-G PSM. One is to run the WiJET-G

PSM directly from the utility CD while the other is to run a locally installed WiJET-G

PSM from a hard-drive.

To run the PSM directly from the utility CD, insert the utility CD into CD-Drive and click

the “Run from CD” button in an auto-start window. If the auto-run window does not

show up automatically, open My Computer and explore on the CD-Drive where the

utility CD is inserted and execute WiJET.exe.

To run the locally installed PSM from a hard-drive, start WiJET-G PSM program located

under the Programs Folder in the Windows Start menu, WiJET Utility as shown in

Figure 3.2. You can also double-click on the WiJET-G shortcut on Windows desktop to

start PSM.