User's Manual

WiJET-G Technical Manual
20
Reboot WiJET-G: This will reboot the WiJET-G. Note that it will not change the User
name or password if you did not click Apply beforehand.
4.3.4 Firmware and Banner Page Upload
When you click on the Firmware and Banner Page hyperlink, you should see the web
page as shown in figure 4.7.
Figure 4.7 Firmware and Banner Page Upload
Upload Options: To select which functionality you wish to perform on the WiJET-G,
whether it is a firmware upload or a Banner page upload. Select which of the two
options you wish to select and check the appropriate selection circle.
File path/name: If you click the browse button to the right of the field, you will get a file
selection box. For Firmware file, you will want to get the file with the extension of
.tar.gz. For Banner page file, you will want to get a file with the extension of .jpg. For
the best picture on the WiJET-G banner screen, the picture file should be of 800 x 600
resolution. The maximum .jpg size is 2 megabytes or 2048 bytes.
Warning: When uploading the firmware or banner page, do NOT power off or
disconnect the WiJET-G unit. Doing so may damage the equipment.