User's Manual

WiJET-G Technical Manual

3. You can use either hardware reset button or power cycle to reboot the WiJET-G

before the timer ends, and that will cause WiJET-G reverting back to factory

default settings.

4. Observe that, during the next boot-up screen after above steps, a message of

Reset to Factory Default should appear next to the Timer message. It indicates

the operation is successful.

Note: The subsequent boot-up screen should not display the Reset to Factory

Default message unless being triggered using above procedure or having

corrupted data in the WiJET-G.

Caution: Please note that resetting the WiJET-G to its factory default means losing

all configurations and encryption information you may have set through the

web interface!

2.3 Software Installation

The following details the steps involved in installing the software needed to control the

WiJET-G.

2.3.1 System Requirements for User Software

To use the WiJET-G’s user software, your computer must meet the following

requirements.

• Wi-Fi or IEEE 802.11g enabled computer (either built-in or add-on NIC);

• Windows 98/NT4/ME/2000/XP; and

• Minimum equivalent processing power of Pentium 3 at 750 MHz and 64MB of

RAM.

2.3.1.1 Installation for the WiJET-G Presentation Session Manager (PSM)

This step is optional and can be skipped for those who simply want to run WiJET-G

Presentation Session Manager (PSM) without the administration capability. WiJET-G

PSM can be executed on CD-ROM without being installed to the local hard drive. To

install the WiJET-G utility on your local hard drive, insert the Installation CD in your

computer’s CD-ROM drive. A Selection window would automatically start and the user

can choose to run the PSM from CD-ROM or to install the PSM onto the local hard

drive. If the program does not automatically start, go to “My Computer” and double

click on the Installation Disc icon. Click on WiJET.exe once you can see the CDs

contents.

Simply follow the instructions from the installation process to install the PSM utility once

the installation program starts running.