User Manual

Form No. 104820
Slide Hammer Puller Sets
Slide hammer puller sets have several pulling attachments to give the user various methods for pulling,
maintenance, and repair applications; the slide hammer exerts force when needed. Recommended assemblies
for the slide hammer are shown in this parts list.
Note: Each set does not include all the attachments shown.
Refer to the back of this sheet for the contents of each set.
1
Slide Hammer
Grip Wrench Adapter
Note: If the grip wrench has a double lead
thread, it will be necessary to order a double
lead adapter (218875).
3-Jaw External & Internal Pullers
Pulling Adapter
Front Hub Puller
(also used with
slide hammer)
Internal Pulling Attachment
(see back of sheet for parts list)
2-Jaw External & Internal Pullers
Dent Puller
Seal Hook
Parts List & Instructions
for: 1155 1176 1181
1156 1177 1189
1157 1178 7947
1158 1179 7948
SPX Corporation
655 Eisenhower Drive
Owatonna, MN 55060-0995 USA
Phone: [phone]
Tech. Serv.: [phone]
Fax: [phone]
Order Entry: [phone]
Fax: [phone]
International Sales: [phone]
Fax: [phone]
http://www.otctools.com
SPX Corporation-Fluid Power
5885 11th Street
Rockford, IL 61109-3699 USA
Phone: [phone]
Tech. Serv.: [phone]
Fax: [phone]
Order Entry: [phone]
Fax: [phone]
http://www.powerteam.com
© SPX Corporation
Sheet No. 1 of 1
Rev. D, April 23, 2007
Shaded area reflects the last
revision made to this form.