User Manual

Sheet No.
Issue Date: Rev. A, Nov. 7, 2006
© 2006 SPX Corporation
Form No. 537281
Parts List &
Operating Instructions
for: 1725
SPX Corporation
655 Eisenhower Drive
Owatonna, MN 55060-0995 USA
Phone: [phone]
Tech. Serv.: [phone]
Fax: [phone]
Order Entry: [phone]
Fax: [phone]
International Sales: [phone]
Fax: [phone]
Engine Support Bar
Max. Capacity: 700 lbs.
Item Part No.
No. No. Reqd. Description
1 532525 1 Tube
2 532938 1 Third Arm
3 532936 2Slide
4 11006 3Cap Screw
5 537077 3End Cap
6 540863 2 J-Hook
7 540670 2 Washer
(14 mm)
8 10208 2Hex Nut
(1/2-13)
9 532935 3Support Foot
10 541000 2Sling
537280 1 Decal
1 of 1
1
2
7, 8
3
4
6
9
10
Safety Precautions
WARNING: To prevent personal injury,
•
Study, understand, and follow all instructions before using this device.
•
Wear eye protection that meets ANSI Z87.1 and OSHA standards.
•
This tool is designed to be an engine support bar when a transverse axle or
transmission is being repaired or removed. Do not use this tool for any
purpose other than for which it was designed.
•
Do not exceed the rated capacity of this tool.
•
The vehicle’s lip structure strength must be adequate to support the weight
of the engine; the lip structure surface must be flat to prevent slippage of the
engine support bar.
•
Stay out from underneath a load that is suspended by a lifting or support
device.
Parts List
Refer to any operating instructions included with the product for detailed information
about operation, testing, disassembly, reassembly, and preventive maintenance.
Items found in this parts list have been carefully tested and selected by OTC.
Therefore: Use only genuine OTC replacement parts.
Additional questions can be directed to our Technical Service Dept. at 1-800-533-6127.
5