User Manual

6480 Ford Camshaft Holding Tool Adapter

Application: 1997 – 2002 4.0L SOHC V6 Ford Explorer, Mercury Mountaineer

Note: This tool is used with No. 6481 (511549)

Ford Camshaft Holding Tool.

1. Install tool Nos. 6480 (511548) and 6481

(511549) on the camshaft as shown.

2. Secure tool No. 6481 (511549) to the cylinder

head.

3. Service the timing chain as required according

to instructions in the vehicle service manual.

4. Torque fasteners to factory specifications.

WARNING: Wear eye protection that

meets ANSI Z87.1 and OSHA standards.

No. 6481

(511549)

No. 6480

(511548)

NOTE: Same as Ford No. 303-576 (T97T-6256-D).

6481 Ford Camshaft Holding Tool

Application: 1997 – 2002 4.0L SOHC V6 Ford Explorer, Mercury Mountaineer

Note: This tool is used with No. 6480 (511548)

Ford Camshaft Holding Tool Adapter.

1. Install tool Nos. 6480 (511548) and 6481

(511549) on the camshaft as shown.

2. Secure tool No. 6481 (511549) to the cylinder

head.

3. Service the timing chain as required

according to instructions in the vehicle service

manual.