User Guide

ManualsBrandsOTC ManualsAutomotiveCam Tool Set - Ford 1.6L 4V Engine

Parts List & Operating Instructions for

No. 6683 Ford 1.6L Engine Cam Tool Kit

Ford Tool Application Chart

Year Model Engine Tool Description Part No. Ford

American

Part No.

Ford Global

Part No.

2013-2014 Escape 1.6L VCT Alignment Tool

Camshaft Holding Timing Tool

Crankshaft TDC Timing Pin

567620

567621

567623

303-1097

303-376B

303-748

2011-2014 Fiesta 1.6L VCT Alignment Tool

Camshaft Holding Timing Tool

Crankshaft TDC Timing Pin

567620

567621

567623

303-1097

303-376B

303-748

2013-2014 Fusion 1.6L VCT Alignment Tool

Camshaft Holding Timing Tool

Crankshaft TDC Timing Pin

567620

567621

567623

303-1097

303-376B

303-748

2013-2014 Transit 1.6L VCT Alignment Tool

Camshaft Holding Timing Tool

Crankshaft TDC Timing Pin

567620

567621

567623

303-1097

303-376B

303-748

567620 567621

567623

Summary of content (3 pages)

PAGE 1
Parts List & Operating Instructions for No. 6683 Ford 1.6L Engine Cam Tool Kit 567620 567623 567621 Ford Tool Application Chart Year Model Engine Tool Description Part No. Ford American Part No. Ford Global Part No. 2013-2014 Escape 1.6L VCT Alignment Tool Camshaft Holding Timing Tool Crankshaft TDC Timing Pin 567620 567621 567623 303-1097 303-376B 303-748 2011-2014 Fiesta 1.
PAGE 2
Parts List & Operating Instructions Form No. 567787, Sheet 1 of 2 back 567620 Ford VCT Alignment Tool Application: 2011 – 2014 1.6L Escape, Fusion, Transit 2013 – 2014 1.6L Fiesta CAUTION: Do not loosen or remove the crankshaft pulley bolt without first installing the 567620. The crankshaft pulley and the crankshaft timing sprocket are not keyed to the crankshaft.
PAGE 3
Parts List & Operating Instructions Form No. 567787 567623 Ford Crankshaft TDC Timing Pin Application: 2011 – 2014 1.6L Escape, Fusion, Transit 2013 – 2014 1.6L Fiesta NOTE: The 567623 Crankshaft TDC Timing Pin will contact the crankshaft and prevent it from turning past TDC. However, the crankshaft can still be rotated in the counterclockwise direction. The crankshaft must remain at the TDC position during the crankshaft pulley removal and installation. 1. Remove the engine plug bolt.