User's Manual

20 21
Programming Amigo R1/R2 Receivers
A. A. To assign receiver Name (i.e., child’s name), use the keypad buttons ▲ ▼◄ ► to
navigate. Delete the current name by pressing ◄, while standing on the top line. Space
can be inserted between names by pressing ►. Within this screen, use the keypad
buttons to select the desired character, then press the SYNC button to save each
character. To SHIFT, highlight SHIFT and press the SYNC button. When finished,
highlight SAVE and press the SYNC button.
To exit and cancel, press the C (CLEAR) button.
B. Assign Ear. Select Right or Left using ▲ ▼ buttons. Press the ◄ button to save and
exit.
C. Choose FM Gain. Default setting is 0. Use ▲ ▼ to navigate and change gain value.
When finished, press the ◄ button to save and exit.
D. Choose FM+HA Gain; default is +10. Use ▲ ▼ to navigate and change gain value.
When finished, press the ◄ button to save and exit.
E. 3 position switch: You can lock the user switch to a single function, or set to unlock.
Use ▲ ▼ to navigate and press SYNC to select. When finished, press ◄ to save and
exit.
Programming Amigo R1/R2 Receivers
Place one R1/R2 receiver within 20-40 cm of the transmitter. The receiver must be
turned on and connected to a live hearing instrument or CI adaptor.
Open the View/Program Receiver menu by
using the ► keypad button. The transmitter
will ‘find’ the receiver and display its name or
serial number. Press ► to continue.
NOTE: Maintain the receiver in the same posi-
tion during the entire programming sequence.
Each time you change a default setting, the
programmer will send that setting to the
receiver.