User's Manual

24 25
Using the FM Channel Wizard (T20/T21/WRP)
The Channel Wizard will help you find interference-free primary and team teaching
channels. Prior to starting the Channel Wizard:
• Obtain the monitor earphones
• Turn on all FM sources in the building/room
A. Scan and Select Channel Set: Press ► to begin the
scanning process. The Channel Wizard will scan
through all Amigo channels. Upon completion, a list
of available channels will be created.
Unusable channels will be greyed out. You can
accept the entire list by highlighting Select All, or
choose Clear All. Then scroll to select a limited
number of channels from the list of usable channels
by pressing SYNC. Press ◄ to save and exit.
Note: Carry out the scan at a time in accordance with typical school usage schedule.
B. Monitor Single Channel: This function allows you to monitor the quality of a single
channel.
Press ► to access the menu and insert the Monitor earphones into the audio jack on
the bottom of the transmitter.
You can increase the volume by pressing ► to highlight the headphones icon.
Highlight the channel then press ▲ ▼ to scroll and select the desired channel to
monitor.
Listen for interference; if detected, you may wish to change the primary channel
used in that classroom.
Note: Make sure you have removed the microphone cord on the monitoring transmitter.
FM Channel
Wizard
Scan & Select
Channel Set