User's Manual

8 9
Preparing your Amigo system
Inserting battery
Remove the battery lid on the back of the WRP and insert the rechargeable battery -
remember to position the battery according to the markings (+/ -) on the label.
Then replace the battery lid. The WRP can then be used to charge the battery that came
in the package.
Note: The positive and negative ends of the battery may appear similar, so doublecheck
that the battery is positioned correctly.
Charging the battery
To charge the battery, plug in the charger as
shown in the picture.
The Amigo WRP uses one AA rechargeable NiMH
battery, which must be charged for at least 14
hours before being used for the first time.
The WRP offers failsafe charging, which prevents
alkaline batteries being charged.
Charging Error
Check
Battery!
The display on the WRP
will indicate when the unit is
charging. Also, the LED will
turn on and shine green.
Note: With a typical user pattern it is recommended to replace rechargeable batteries
once every year, because the battery capacity decreases each time it is charged.
Battery charging