User's Manual

16 17
Synchronising Amigo receivers
Connect the receiver to a hearing instrument, and turn it on. Check that the receiver
switch is set to the correct mode, i.e. FM only or FM+HA mode.
Off FM-only FM+HA
Within a distance of approximately 50 cm, press the SYNC button. The LED on the
transmitter will then blink three times, and the SYNC logo will appear on the screen.
If the synchronisation is successful, the receiver will also blink three times.
Note: The switch on the receivers can be disabled, so use the WRP or the T20/T21 to
check the status. In its default setting, the receiver switch is enabled.
When the receiver’s LED is on, it confirms that:
• The hearing instrument battery is ok
• The receiver is on
• The transmitter and receiver are working in perfect harmony
• The child is on the right channel