Installation Guide

PEOPLE FIRST
Oticon A/S Kongebakken 9 DK-2765 Smørum www.oticon.com
Main [phone] Fax [phone] Denmark CVR-no. 42334219
2
Oticon Radio Model - Quick Installation Guide
Radio Model Name: Audio Streaming Module
The Audio Streaming Module with all its mounted components is intended to be installed as a module into Oticons wireless accessory devices, commonly referred
to as the ConnectLine products (e.g. the Streamer Pro).
The module requires only a battery to be mounted
together with its ferrite coil antenna in an external
plastic shell (as shown on the previous page). The
two microphones of the module are mounted onboard
its PCB and the module requires no speaker as all
sound is streamed wirelessly to any connected
devices (e.g. Oticons wireless hearing aids and/or
mobile phones).
The module has its power management subsystem
including all voltage regulators and the charging
circuit on board. Also all
data interfaces (input-
output) on the board are buffered.
The module PCB is depicted to the right with its
main components and connections:
Audio Streaming Module PCB (Top side)
Audio Streaming Module PCB (Bottom side)