Installation Instructions

ManualsBrandsOticon ManualsElectronicsBTE/RITE Fusion 2

PEOPLE FIRST

Oticon A/S Kongebakken 9 DK-2765 Smørum www.oticon.com

Main +45 39 17 71 00 Fax +45 39 27 79 00 Denmark CVR-no. 42334219

Oticon Radio Model - Quick Installation Guide

Radio Model Name: BTE/RITE Fusion 2

The mini RITE Fusion 2 radio model is a low power, inductive radio transceiver working at 3.84 MHz and consisting of a Digital-Signal-Processor (DSP), a radio

Front-End (FE) and memory (EEPROM) – connected to an antenna coil, a telecoil and smaller components, all mounted on a flexible Printed-Circuit-Board (PCB).

This Printed-Circuit-Board (PCB)

with all its mounted components

is intended to be installed as a

module into Oticon wireless

hearing aid devices of BTE and

RITE wearing styles.

The module also has all voltage

regulators included inside the

DSP and FE and

buffered data

programming inputs on the

board.

The module requires a battery,

one or two microphones and an

audio receiver to be attached and

must be mounted in an external

plastic shell.

The module is depicted to the

right with its main components

and connections:

Summary of content (3 pages)

PAGE 1
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: BTE/RITE Fusion 2 The mini RITE Fusion 2 radio model is a low power, inductive radio transceiver working at 3.84 MHz and consisting of a Digital-Signal-Processor (DSP), a radio Front-End (FE) and memory (EEPROM) – connected to an antenna coil, a telecoil and smaller components, all mounted on a flexible Printed-Circuit-Board (PCB).
PAGE 2
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: BTE/RITE Fusion 2 When the BTE/RITE Fusion 2 module is to be implemented inside the RITE wearing styles of Oticon’s wireless hearing aids, an extra small add-on PCB with passive filtering components is added due to EMC reasons.
PAGE 3
PEOPLE FIRST Oticon Radio Model - Regulatory Label Information Radio Model Name: BTE / RITE Fusion 2 Contains: U28FU2BTERIT 1350B-FU2BTERIT FCC ID: IC: NOTICE: This device complies with Part 15 of the FCC Rules and with the license exempt standard RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.