User's Manual

Standby
Push the button for a minimum of 3 seconds to set the
instrument in standby mode.
To reactivate the instrument, push the button shortly again.
Use the standby function if you need to silence the instru-
ment while you have the instrument on.
Push
3 sec
Note: pushing either side of the button will set the instrument
on standby.
A
B
8
9
Putting on your instrument
Place the tip of the earmould in your
ear canal, twisting slightly, making
sure that the top part of the earmould
(A) is pushed behind and under the
fold (B) of your ear.
Gently pull down your earlope and
press the earmould in the direction
of the ear canal.
With the earmould positioned correctly
in your ear, place the hearing instrument
behind your ear by lifting its lower part
and sliding it over the top of your ear.