Product Specs

11
 To upgrade the Autel Link App
 Please update the【Autel Link】App in Android App Market or iOS
App Store.
NOTE
You need to re-pair your phone and the smart watch after finishing the Autel
Link App update.
2.8 Factory Reset
 To reset the smart watch
 Method 1: Tap the smart watch【power button】to enter the
application list＞Tap ＞ 【Factory reset】＞【OK】.
 Method 2: Access the Autel Link App＞【Devices】＞Choose the
connected smart watch＞【Reset】＞【OK】, tap 【OK】again when
a pop-up appear on the smart watch.
NOTE
When choose【Factory reset】, the stored data will be deleted.
If tick【Clear pke data】, the original pke data will be deleted from smart
watch.
2.9 Charge the Device
 To charge the device
 Connect the power adapter to the power outlet, then connect the USB
port of the charging base with the power adapter.
 Place the smart watch horizontally on the charging base. Align
magnetic contacts on the charging base and that on smart watch.
IMPORTANT
Please use the attached charging base, and the charger with a rated output
voltage of 5V and a rated output current over 1A to charge the smart watch.
When the smart watch has a low battery, connect it to the power source,
and an icon of charging will be displayed.
The charging time is about 1 hour. Under different environmental conditions,
the required charging time varies slightly. When finish the charging, please
disconnect the charger in time .