Product Specs

17
 Tap the【power button】to enter the application list＞Tap ＞
【add Alarm】.
 Set the time ＞【OK】 ＞Set the repetition period of the alarm＞【OK】
＞Set the【Delay Time】＞Tap【OK】to finish the set.
 Tap the existing alarm clock to edit or delete it.
NOTE
By default, it is a one-time alarm when the repetition period of the alarm is
not set.
The alarm clock only supports the default ringtone of the smart watch.
 To set a clock through Autel Link App
 Access the【Autel Link】App＞【Devices】＞Tap the connected
smart watch＞【Clock】＞【add Alarm】＞Set the time, clock label,
repetition period of the alarm＞Tap【OK】in the upper right corner.
 Tap the【power button】to enter the application list and tap to
check whether the alarm is set successfully.
 Tap the existing alarm clock to edit or delete it.
NOTE
The alarm clocks on the smart watch and the Autel Link App are
synchronized, and up to 5 alarms can be set.
When the alarm vibrates, tap the screen or the power button of the smart
watch to delay the alarm. By default, the delay time is 10 minutes, you can
also adjust it into 5/15/30 minutes.
To turn off the alarm, tap the power button of the smart watch.
When the alarm vibrates and there is no operation within 30 seconds, the
alarm will be automatically closed after three times of automatic delay.
3.7 Use the Flashlight
Tap the【power button】to enter the application list and tap to turn on
the flashlight.
Then the screen will display bright light, you can slide left to change the
color of the light. Touch the screen to turn off the flashlight. Touch the
screen again to turn it on. Slide the screen right to exit the 【 Flashlight 】
application.