Product Specs

26
NOTE
For the accuracy of the measurement, please wear the smart watch
normally and avoid the joints. Ensure that the heart rate sensing area is
close to the skin and not covered by foreign objects, not wearing loosely.
Keep your body still.
The test range of blood oxygen measurement is 70%~100%.
The duration of a single blood oxygen measurement is about 30 seconds.
While measuring blood oxygen saturation, the smart watch will measure a
single heart rate value.
The measurement will be interrupted when swiping the smart watch screen
to the right, when there is an incoming call/alarm reminder on the smart
watch.
Manually measured data can be viewed through the【Autel Link】App. The
data will be presented in phone every 30 minute.
5.5 Stand reminder
The【Stand reminder】function will detect your activity status within the set
time, 60 minutes one time by default.
If you have been sitting in the period, the smart watch will vibrate and
brighten the screen to remind you that you should stand up and move your
body to ensure your full rest and good health.
The mobile phone defaults to turn on the 【 Stand reminder】 function, if
you do not want to be disturbed, you can set it off.
 To turn off stand reminder
 Tap the【power button】to enter the application list＞Tap ＞
【Health】＞【Stand reminder】
NOTE
If you turn on the【Do Not Disturb】mode, the smart watch will not vibrate
to remind you.
When you are asleep, the smart watch will not vibrate to remind you in case
of disturbing your rest.