User's Manual

Performing Advanced Functions
REMARKS The system stops, and exits the command only when a key is pressed. This
command returns no message. Not applicable to the A733GSM.
REMOTE No.
E
XAMPLE TX
9193 TX 0
#
TX 1
9193 TX 0
#
TX 5
9193 TX 0
#
B
AVAILABLE FOR
A731 A733A732 A733GSM
DESCRIPTION Sends a broadcast frame.
PARAMETERS None.
R
ETURNS A data block.
REMARKS After the device sends the broadcast frame, it will listen for answers. All valid
answers will be listed with their IDs. Not applicable to the A733GSM.
REMOTE Yes. A device getting this frame would have to wait for a random time (2 to 10
seconds) before performing the actual broadcast; if no terminal is active, then no
results will be listed. A list of heard stations with their RF levels will be updated in
the memory and available whenever the BLST command is issued.
E
XAMPLE B
9193 B 0
#234 BA 0
#7851 BA 0
BLST
AVAILABLE FOR
A731 A733A732 A733GSM
DESCRIPTION Lists the stations heard after the last broadcast command was issued.
P
ARAMETERS None.
R
ETURNS The date and time when the broadcast was performed, the number of stations
heard, and a list with the heard stations’ ID and their respective RF levels.
R
EMARKS GET only. Not applicable to the A733GSM.
R
EMOTE Yes. The remote version will list only the first 9 stations heard.
E
XAMPLE BLST
9193 BLST 10/12/1999 12:15:04 4
2008 150
2003 177
6883 168
4027 220
#
37