User's Manual

Performing Advanced Functions
3.4 Using terminal commands
Following is a list of available commands and an explanation of their use.
Note: You can type uppercase or lowercase characters because the commands are not
case sensitive.
CMDS
AVAILABLE FOR
A731 A733A732 A733GSM
DESCRIPTION Returns a list of supported commands.
PARAMETERS None.
R
ETURNS A list of strings separated by spaces.
REMARKS GET only.
REMOTE No.
E
XAMPLE CMDS
9193 CMDS CMDS ID PMP RSSI TIME FREQ SLOT DATA INFO RX TX
FDEV 0
#
TIME
AVAILABLE FOR
A731 A733A732 A733GSM
DESCRIPTION Sets/returns the real time clock.
P
ARAMETERS The actual time, or none in the GET version.
RETURNS The actual time as dd/mm/yyyy hh:mm:ss.
REMARKS GET/SET.
R
EMOTE No.
E
XAMPLE TIME 12/12/1999 22:10:10
9193 TIME 0
#
TIME
9193 TIME 12/12/1998 22:10:10 0
#
FREQ
 CAUTION: Do not change the frequency of your device without reason: apart from the fact that
it might not communicate in the network anymore, you could also violate the
applicable radio-communications laws in your country. Depending on the
destination country, some models might also return an error message.
A
VAILABLE FOR
A731 A733A732 A733GSM
D
ESCRIPTION Sets/returns the operating frequency.
PARAMETERS The operating frequency and step (Hz), or none in the GET version.
RETURNS The actual frequency and step, in Hz.
29