User's Manual

CHAPTER3
UsingTerminalCommands
25
After the RTU has sent a notification, the radio/GSM module will stay
on for at least that time independent on the LT settings.
RETURNS The current setting.
REMOTE Yes.
EXAMPLE # ltnotifytmout
5 ltnotifytmout 300 0
#
# ltnotifytmout 3600
5 ltnotifytmout 0
#
NOTIFY
DESCRIPTION This command is used to query or set the target for notifications.
PARAMETERS The phone number where to send notifications as SMS.
REMARKS GET/SET.
Use an empty string (“”) for the phone number to disable sending
notifications.
Note: For GSM based devices, sending SMS must be enabled for the given
SIM card.
RETURNS The current settings.
REMOTE Yes, SET only.
EXAMPLE # NOTIFY 19695 46333 33922
# 5 NOTIFY 0
#
# NOTIFY
5 NOTIFY 19695 46333 33922 0
#
# NOTIFY
48012 NOTIFY 0043-2243-38280-6
#
# NOTIFY “”
48012 NOTIFY 0
#