User's Manual

Table Of Contents

CHAPTER3

UsingTerminalCommands

VER

DESCRIPTION Requests the firmware version of the device.

PARAMETERS None.

REMARKS GET only.

RETURNS The current version.

REMOTE Yes.

EXAMPLE # VER 

42914 VER 1.3.2 0 

VERB

DESCRIPTION Sets the verbosity level of the device. This command is used for

debugging only.

 WARNING The device will consume a lot more power when the verbosity level is

greater than 0. This could discharge your battery and/or prevent

proper operation.

PARAMETERS A verbosity level (0...255).

REMARKS SET only.

RETURNS Error code.

REMOTE No.

EXAMPLE VERB 1 # tx: 'AT'

rx: 'OK'

tx: 'ATE0Q0V1&K3&C1&D2'

rx: 'OK'

tx: 'AT+CMEE=1'

rx: 'OK'

tx: 'AT+CRC=1'

XDATA

DESCRIPTION This command requests data for a list of logical channels for given

timestamps.

PARAMETERS XDATA requires a lot of parameters for specifying what to retrieve.

Please consult the A740 User Manual for detailed explanation of this

command. The output of the command is not intended to be human

readable.

REMARKS GET only. (This is a data retrieval command, local as well as remote.)

RETURNS A data block.