User's Manual
Table Of Contents
CHAPTER2
Openingthepackages
7
Chapter2.UsingtheaddWAVE
The A753 addWAVE remote telemetry unit (RTU) is part of the A7xx
series. For testing purposes, you should have an A840 or A850
Telemetry Gateway with access to the internet installed before you
install the A753 RTU. For information about installing the A840 or
A850, refer to device’s user’s guide.
Openingthepackages
The addWAVE RTU package contains the following items:
• A753UHF Series 4 RTU (or A752 or A751)
• an antenna including a mounting bracket and a 3 m (9 ft.) cable
• three ring clamps (one for tightening the mounting bracket of the
antenna)
If ordered, the following items come in separate packaging:
• solar panel with ring clamp
• set of aluminum poles
•LED tool
Make sure you have received all the equipment and read through the
instructions that follow. When you are sure you understand them, you
are ready to install your RTU.