User's Manual

CHAPTER3
UsingTerminalCommands
32
RETURNS If no parameter was entered, the current access point user name is
returned. Otherwise the error code of the operation is returned.
REMOTE No.
EXAMPLE # GPRSAPNUN "t-mobile"
42914 GPRSAPNUN 0
#
# GPRSAPNUN
42914 GPRSAPNUN "t-mobile" 0
#
GPRSCONN
D
ESCRIPTION Enable/Disables the GPRS functionality.
PARAMETERS •None
• 1 enables GPRS function.
• 0 disables GPRS function.
REMARKS SET only.
RETURNS The error code.
REMOTE No.
EXAMPLE # GPRSCONN
42914 GPRSCONN 0
#
GPRSCONNADDR
D
ESCRIPTION Sets/returns the IP address and the port of the A850 Telemetry
Gateway.
PARAMETERS None or the IP address and the port of the A850 Gateway and
optionally the connection preference. The user may specify by
entering a new IP address and port if the new connection is primary or
a secondary is used. If the index is left, the connection type will be
taken as primary.
REMARKS GET/SET.
RETURNS If no parameter was entered, the A850’s IP and Port is returned.
Otherwise the error code of the operation is returned.
REMOTE No.
EXAMPLE # GPRSCONNADDR "172.17.5.99" 81
42914 GPRSCONNADDR 0
#
# GPRSCONNADDR
42914 GPRSCONNADDR